Montage- und Betriebsanleitung / User manual
VXe SLS
© Danfoss | Produced by Danfoss Redan A/S | 2022.03 | 25
AQ40514397064001-000101
145X2068
Domestic hot water
The DHW temperature is regulated by an electronic actuator/control
valve, which is connected to the Danfoss ECL, including an immersion
sensor for installation in the storage cylinder.
Self-acting flow controller with integrated control valve and
actuator
To regulate the domestic hot water temperature, the VXe SLS is equipped
with a flow controller with integrated control valve Danfoss AHQM and
a Danfoss AMVelectric actuator.
The AMV actuator is electrically wired to the controller from the plant.
The controller closes when set max. flow is exceeded.
In the combination with the electrical actuator AMV and ECL electronic
controller the flow and temperature can be controlled to achieve high-
est energy savings.
AMV 13
The actuator has undergone a functional test and is preset from
factory.
Depending on the selected setting of the safety function, the AMV 13
valve is fully opened or closed when the voltage supply is switched off.
AMV 150
The actuator has undergone a functional test and is preset from
factory.
In the event of operating disturbances the actuator can be shut off
manually by turning the manual override knob on top of the actuator
clockwise. Please note that the knob can be “tight” to turn.
For additional information see manuals for:
Self-acting flow controller with integrated control valve and
actuator AHQM.
Electronic actuator AMV 13
Electronic actuator AMV 150
Safety function, Jumo AT
The DHW circuit can be supplied with a safety thermostat Jumo AT
for protection against overheating.
From factory the Jumo AT safety thermostat is pre-wired to the
Danfoss ECL controller with a 2 m cable, enabling the thermostat
housing to be mounted in any mounting position on the household
piping (HE supply) on site.
For additional information see the enclosed manuals for:
Jumo AT
13. DOMESTIC HOT WATER
'+6076,
(,+ 'DQIRVV
,QVWUXFWLRQV
$09
5
5
$099096
$09$940
$099%
1
1
AMV 13
AHQM
1
Installation Guide
AHQM, DN 40-100
Danfoss Heating
VI.LR.K1.00
DH-SMT/SI
Δp
v
+
–
Q
max
Δp
v
≥ 0.5 bar
P
test
= 1.5 × PN
Δp
v
: 0.5-4.0 bar
DN 40, 50
DN 50-100
AMV(E) 435 +
AHQM DN 40, 50
AMV(E) 435 +
AHQM DN 50-100
AMV(E) 438 SD +
AHQM DN 40, 50
AMV(E) 438 SD +
AHQM DN 50-100
Instructions
AMV 150
73691180 DH-SMT/SI
VI.KU.N2.1J
© Danfoss 01/2008
1
ENglIsh
Actuators for three point control AMV 150
www.danfoss.com
Page 2
DANsK
Motorer til 3-punkts styring AMV 150
www.danfoss.dk
Side 3
DEUTsCh
Stellantriebe für 3-Pkt.- Eingangssignal AMV 150
www.danfoss.de
Seite 3
sVENsKA
Motor för 3-punktsreglering AMV 150
varme.danfoss.se
Sida 4
NEDERlANDs
Servomotor met 3-puntssturing AMV 150
www.danfoss.nl
Pagina 4
lIETUVIŲ K.
Pavaros trijų padėčių valdymui AMV 150
www.danfoss.lt
5 puslapis
lATVIsKI
Motori trīs punktu kontrolei AMV 150
www.danfoss.com
Lpp. 5
MAgYAR
Szelepmozgatók hárompontos szabályozáshoz AMV 150
www.danfoss.com
6. oldal
ČEsKY
Servopohony s tříbodovým regulačním signálem AMV 150
www.danfoss.cz
Strana 6
POlsKI
Siłowniki sterowane sygnałem 3-punktowym AMV 150
www.danfoss.pl
Strona 7
РУССКИЙ
Электроприводы для трехпозиционного регулирования AMV 150
www.danfoss.ru
Страница 7
AMV 150 +
AMV 150 +
AMV 150 +
VS2 (DN 15)
VMV
AVQM (DN 15)
Press and hold the button (on
the bottom side of the actuator)
during manual operation.
AMV 150
Manual override
