![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive-fc-301/vlt-automationdrive-fc-301_programming-manual_507840327.webp)
Parameter 9-94 Changed Parameters (5)
Table 577: Parameter 9-94 Changed Parameters (5)
9-94 Changed Parameters (5)
Default value: 0
Parameter type: Range, 0 - 9999
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: False
This parameters shows a list of all the drive parameters deviating from default setting.
Parameter 9-99 PROFIBUS Revision Counter
Table 578: Parameter 9-99 PROFIBUS Revision Counter
9-99 PROFIBUS Revision Counter
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation:
Readout of revision count.
5.11 Parameter Group 10-** CAN Fieldbus
5.11.1 10-0* Common Settings
Parameter 10-00 CAN Protocol
Table 579: Parameter 10-00 CAN Protocol
10-00 CAN Protocol
Default value: Size related
Parameter type: Option
Setup: 2 setups
Conversion index: –
Data type: Uint8
Change during operation: False
The options available depend on the installed option card.
Option
Name
Description
[0]
CANopen
[1]
DeviceNet
Parameter 10-01 Baud Rate Select
Table 580: Parameter 10-01 Baud Rate Select
10-01 Baud Rate Select
Default value: Size related
Parameter type: Option
Setup: 2 setups
Conversion index: –
Data type: Uint8
Change during operation: True
Select the fieldbus transmission speed. The selection must correspond to the transmission speed of the master and of the other
fieldbus nodes.
Option
Name
Description
[16]
10 Kbps
[17]
20 Kbps
[18]
50 Kbps
[19]
100 Kbps
AU275636650261en-000101 / 130R0334 | 327
Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide