Danfoss VLT AutomationDrive FC 301, Руководство по эксплуатации, Страница: 25 / 84

130BD598.10
Auto
on
Reset
Hand
on
Off
Status
Quick
Menu
Main
Menu
Alarm
Log
Back
Canc
el
Inf
o
OK
Status 1(1)
36.4 kW
Auto Remote Ramping
0.000
On
Alarm
Warn.
A
7.83 A 799 RPM
B
C
D
53.2 %
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 19 20 21
Illustration 5.1 GLCP
A. Display area
The display area is activated when the frequency converter
receives power from the mains voltage, a DC bus terminal,
or a 24 V DC external supply.
The information shown on the LCP can be customised for
user application. Select options in the
Quick Menu Q3-13
Display Settings .
Display Parameter number Default setting
1 0-20 [1617] Speed [RPM]
2 0-21 [1614] Motor Current
3 0-22 [1610] Power [kW]
4 0-23 [1613] Frequency
5 0-24 [1602] Reference %
Table 5.1 Legend to Illustration 5.1 , Display Area
B. Display menu keys
Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
Key Function
6 Status Shows operational information.
7 Quick Menu Allows access to programming parameters
for initial set-up instructions and many
detailed application instructions.
Key Function
8 Main Menu Allows access to all programming
parameters.
9 Alarm Log Shows a list of current warnings, the last
10 alarms, and the maintenance log.
Table 5.2 Legend to Illustration 5.1 , Display Menu Keys
C. Navigation keys and indicator lights (LEDs)
Navigation keys are used for programming functions and
moving the display cursor. The navigation keys also
provide speed control in local operation. There are also 3
frequency converter status indicator lights in this area.
Key Function
10 Back Reverts to the previous step or list in the
menu structure.
11 Cancel Cancels the last change or command as long
as the display mode is not changed.
12 Info Press for a definition of the function being
showed.
13 Navigation
Keys
Use the 4 navigation keys to move between
items in the menu.
14 OK Use to access parameter groups or to enable
a selection.
Table 5.3 Legend to Illustration 5.1 , Navigation Keys
Indicator Colour Function
15 On Green The ON indicator light activates
when the frequency converter
receives power from the mains
voltage, a DC bus terminal, or a 24
V external supply.
16 Warn Yellow When warning conditions are met,
the yellow WARN indicator light
comes on and text appears in the
display area identifying the
problem.
17 Alarm Red A fault condition causes the red
alarm light to flash and an alarm
text is showed.
Table 5.4 Legend to Illustration 5.1 , Indicator Lights (LEDs)
Commissioning Operating Instructions
MG33AQ02 Danfoss A/S © 07/2015 All rights reserved. 23
5 5