Danfoss Optyma OP-UPAC015COP04E, Инструкции по применению

Страница: 16 / 48

Accessories
Name Q’ty Location of use
Wiring
3
Connect these to CNG1, 2 or CNS3 on the outdoor
unit PCB when external inputs are used.
These are fixed in the control box with tapes.
When using the wiring, refer to the “External input
harness installation manual”, page 47
Wiring
2
When using external outputs, cut the harness at the
center to produce a pair of connectors, and connect
them to CNH, CNY, CNZ1 and CNZ2 on the outdoor
unit PCB.
These are fixed in the control box with tapes.
When using the wiring, refer to the “External input
harness installation manual”, page 48
Dryer
1
Install in liquid pipe. Dryer pipe diameter need to
reduce with reducer to connect liquid pipe.
This is fixed to unit base plate with tapes.
Reducer (for dryer)
2 Connect to dryer pipe. These are fixed to unit base plate with tapes.
Reducer (for service port)
3
Using for airtight test and vacuuming. Connect to
service port.
"These are fixed to unit base plate with tapes.
When using the reducer, refer to the page 12-13 of In-
structions “Leak detection” and "Vacuum dehydration"."
2. Product description
16
AB408540130380en-000102 © Danfoss | Climate Solutions | 2023.02
Application Guidelines