3
D.3. OPTIONAL - programable fan/occupancy operation : If the programable fan/
occupancy option has been enabled by the installer, the operation of the fan can be set for
each event. Additionally each event can be programed as building occupied or unoccu-
pied. This feature is often tied in to the operation of fresh air dampers. Optimum Start
Control, if set by the building owner or installer, will also be applied to each occupied event
- please refer to installer. The available options are:
a)
Building occupied: Fan On, runs continuously (FAN ON symbol displayed, HOUSE
symbol displayed and static)
b)
Building unoccupied: Fan Auto, turns on and off with heat or cool demand (FAN AUTO
symbol displayed, HOUSE symbol displayed but flashing)
c)
Building unoccupied: Fan On, runs continuously (FAN ON symbol displayed, HOUSE
symbol displayed but flashing)
d)
Building occupied: Fan Auto, turns on and off with heat or cool demand (FAN AUTO
symbol displayed, HOUSE symbol displayed and static)
To select Fan Mode and Occupancy options, press
3
button to toggle to the required setting.
Press NEXT button to move onto event 2 programing and repeat steps D1 and D3 above
D.4. Press NEXT button to move onto events 3, 4, 5 and 6, repeating steps D1 – D3 until all
events are programed
!
Reminder - If thermostat has been set by the building owner or installer for 2 or 4
events per day, only 2 or 4 events can be programed, otherwise 6 events can be
programed
D.5. Press DAY button to advance to the next day. Repeat steps D1-D4 for each available day
(see 6 below)
D.6. OPTIONAL: Copy program from previous day into current day :
a)
Press COPY button to copy program forward from previous day
b)
Repeat as necessary for other days
!
Reminder - Copying Restrictions: Programs can only be copied forward from the
previous day. For example from day 1 to day 2, not from day 1 to day 3
!
Reminder - Thermostat may have restricted temperature settings : In some
installations the building owner or installer may have restricted the temperature
range of the heating and/or cooling. Please refer to the installer
Setting Template
!
Advice – Program setting template: A setting template is provided at the rear of this
document to record program settings
D.7.
REMINDER
-
THERMOSTAT
SET
IN
5/2-
DAY
MODE
: If the thermostat has been set by the
building owner or installer in 5-day / 2-day mode, display will be as opposite.
Programming: one set of programs for Days 1-5, another for Days 6-7
Copying: limited to copying from days 1-5 to days 6-7 or vice-versa
D.8.
REMINDER
-
THERMOSTAT
SET
IN
24
HOUR
MODE
: If the thermostat has been set by
the building owner or installer in 24 hour mode, display will be as opposite.
Copying: not available
Programming: one program repeated each day
D.9. To return the thermostat to Run mode press PROG button
A
UTO
59
81
PM
MO
6
COPY
NEXT
6:30
68
77
AM
MO TU WE TH FR
6:30
68
77
AM
Programming Event 6
time and temperature
Copying program
5/2 day mode
Copying not available
in 24 hour mode
BUTTONS
LCD
DISPLAYS
6:30
68
77
AM
MO
O
N
Copying program
7 day mode
COPY
NEXT
6:30
68
77
AM
MO
O
N
DAY
6:30
68
77
AM
MO
O
N
6:30
O
N
68
77
AM
MO
A
UTO
59
81
PM
MO
6
6:30
A
UTO
68
77
AM
MO
3
PROG