PTR5100-5500W Thermos t at I nstructions
See overleaf for further setting up information
This thermostat is a combination model allowing you to
choose between 3 different models. A, AF and F model.
A model: air onl y , with built in sensor
AF model: air & floo r , with both built in and remote sensor
F model: floor onl y , with remote sensor
Menu Settings
( P art I)
Menu #
01
Sensor selection
Switching differential
Air temperature calibrate
Floor temperature calibrate
Temperature readout
(AF model only )
Maximum floor temperature
(AF model only)
(PTR5100BL model only)
Backlight turning-on time
Temperature format
Clock format
24H (default), 12H
Program time delay
02
03
04
05
06
07
08
09
10
11
Features description
Features Explanation
Adjustment
1 °C(default), 2 °C.........10°C
-1°C = decrease 1°C, 1°C = increase 1°C...
5s , 10s , 15s ,20s (default) , 25s, 30s.
A= to show air temperature, F=to show floor temperature,
A--F = to show both in 5 second intervals
40°C(default)
30 seconds(default) On= always on, OFF= always off
C or F
A, AF, F
(press up or down button to adjust)
-1°C = decrease 1 °C, 1°C = increase 1 °C...
This product should be installed by a qualified electrician.
Please Note: one of the following error messages will appear if one of these problems occur:
The numbers of degree difference before switching.
The default is 1°C which means the thermostat will
switch the heating on 0.5°C below the set temperature
and will turn it off 0.5°C above the set temperature.
With a 2°C differential, the heating will switch on 1°C
below the set temperature and will switch off 1°C
above the set temperature.
This is to calibrate air temperature if required.
This is to calibrate floor temperature if required.
This gives more time for user to set the programmes
before reverting back to standard display
This gives option to choose to show air temperature,
floor temperature or to show both floor & air in interval.
This is to protect the floor surface.
This is to set the backlight turning-on time. User
can also set the backlight always on or off.
This allows users to select between °C or °F.
12/24 Hour clock format selection
Buttons and LCD display
Button / Icon
Description
Menu button
Auto/Vacation mode selection
Increase the set value
Decrease the set value
Set the time and week days
M
The buttons are locked.
Heating is turned on
Button / Icon Description
Auto mode
Vacation mode
Temporary temperature override
Frost protection activated
Programmes number
AUTO
Temporary
Frost protection
E0, meaning the internal sensor is broken, short-circuit or not working properly.
E1, meaning the floor sensor is broken, short-circuit, not connected, or not working properly.
on= activated, off= deactivated
This is to avoid room temperature goes below 5°C
Ver.1.1
P
P
Press buttton t o T urn on/o f f the thermostat. When thermostat is turn ed off, the LCD will only display “OFF”. Now press and hold button for 3 seconds
to bring up a configuration menu. In this mode, press button
to cycle through the menus.
M
M
P
Turning on/off thermostat
Program button
Confirm settings
Remarks: The thermostat will return to standby mode after 20 seconds of inactivity. (Using button will also exit the menu setting)
