manualshive.com logo in svg

Danfoss FC 100 Series, Руководство пользователя

Поделиться
Скачать
Danfoss FC 100 Series Скачать руководство пользователя страница 35

4.5.2. Status Word under Instances 100/150 and 101/151

The status word in Instance 150/151 is de-
fined as follows to the right:

Bit

Bit = 0

Bit = 1

00

Control not ready

Control ready

01

Drive not ready

Drive ready

02

Coasting

Enable

03

No error

Trip

04

No error

Error (no trip)

05

Reserved

-

06

No error

Trip lock

07

No warning

Warning

08

Speed 

≠

 reference

Speed = reference

09

Local operation

Bus control

10

Out of frequency limit

Frequency limit ok

11

No operation

In operation

12

Drive ok

Stopped, auto start

13

Voltage ok

Voltage exceeded

14

Torque ok

Torque exceeded

15

Timer ok

Timer exceeded

Explanation of the Statur Bits:

Bit 00, Control not ready/ready:
Bit 00 = ’0’ means that the frequency converter has tripped.
Bit 00 = ’1’ means that the frequency converter controls are ready, but that the power component
is not necessarily receiving any power supply (in case of external 24 V supply to controls).

Bit 01, Drive ready:
Bit 01 = ’1’. The frequency converter is ready for operation, but there is an active coasting com-
mand via the digital inputs or via serial communication.

Bit 02, Coasting stop:
Bit 02 = ’0’. The frequency converter has released the motor.
Bit 02 = ’1’. The frequency converter can start the motor when a start command is given.

Bit 03, No error/trip:
Bit 03 = ’0’ means that the frequency converter is not in fault mode.
Bit 03 = ’1’ means that the frequency converter is tripped, and that a reset signal is required to
re-establish operation.

Bit 04, No error/error (no trip):
Bit 04 = ’0’ means that the frequency converter is not in fault mode.
Bit 04 = “1” means that there is a frequency converter error but no trip.

Bit 05, Not used:
Bit 05 is not used in the status word.

Bit 06, No error / trip lock:
Bit 06 = ’0’ means that the frequency converter is not in fault mode.
Bit 06 = “1” means that the frequency converter is tripped, and locked.

Bit 07, No warning/warning:
Bit 07 = ’0’ means that there are no warnings.

FC 100/ 200/ 300 DeviceNet

4. How to Control the Frequency Converter

 MG.33.D3.02 - VLT

®

 is a registered Danfoss trademark 

 

35

4

Содержание FC 100 Series



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды