Danfoss ET5070, Руководство оператора, Страница: 27 / 96

3.8 Foot pedal (accessory)
(1) Close machine pedal
(2) Open machine pedal
WARNING!
Risk by fatiguing posture!
A static posture may result in work-related musculosceletal disor-
ders and reduce productivity.
• Make sure that operators have sufficient periods of relief and
recreation.
3.9 Operation modes
The control unit provides for the following operation modes for operat-
ing the forming tool:
•
Manual operation
C.2 / IPC is activated in the control. The forming process
is controlled manually via the buttons on the control panel or ex-
ternal buttons (depth stop or dual foot switch):
–
Activate the button for closing and forming. The
button is used for opening.
–
Dual foot switch
The right foot switch is used for closing and forming. The
left foot switch is used for opening.
–
Depth stop
The tool is closed automatically when the workpiece