Danfoss ET5070, Руководство оператора, Страница: 23 / 96

WARNING!
Risk of injuries!
In particular non-metal workpieces may by overstressed by the
forming process so that this may result in a sudden failure. Chips
or seriously accelerated workpiece parts impose a high risk po-
tential for operators, individuals and objects, even outside the
working area!
•
Relevant workpieces should only be formed using specific
safeguards.
ATTENTION!
Risk of damage to machinery!
The machine lifetime is reduced with a high permanent load,
while wear increases disproportionately.
•
When using the machine in series production, it must not
permanently be loaded with over 2/3 of the maximum opera-
ting pressure.
•
The especially high load during pressure joining of isolators,
structural steel as well as steel ropes (PFC applications) ne-
cessitates machine overhauls after 150,000 forming proces-
ses, each. Please contact our Service department in due
time: +49 (0)6039 9171-0.