38
Automatic Heater Mode Enable / AuH
This setting is normally set to nO .
When set to yES, parameters End and Hdi apply .
Energy Mode Delay / End
This is the delay in minutes between the heater and the compressor operation .
The heater is not allowed to start until this number of minutes has expired after
the compressor has cut out and vice versa .
Automatic Heater Control applies reverse cooling
mode (heating) to your refrigeration appliance .
This feature requires:
A) that your appliance is exposed to ambient tem-
peratures below the desired temperature in your
cabinet (e .g . very cold climates and outdoor use)
B) a special heater (for example a large defrost
heater) built in to your appliance .
7.8 Automatic Heater Control /
AHC
ERC menu
code
Default
Min
Max
Unit
Conv
Unit
Scale
Default Access
Shop Ser OEM
Auto-Heater Control
AHC
Automatic heater mode
enable
AuH
no
no
yES
no
-- -- RW
Energy mode delay
End
60
0
360
no
min
1
-- -- RW
Heater displacement
temperature
Hdi
2 .0/3 .0
0 .0/0 .0
50 .0/90 .0
C/F r
K/
o
R
.1
-- -- RW
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
Heater Displacement Temperature / Hdi
This is the temperature relative to (below) the desired temperature .
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
ERC
102 Reference manual – 7 PARAMETERS
