Danfoss 088U0221, Инструкция

Страница: 16 / 20

Danfoss Heating Solutions VIUHM602 © Danfoss 03/2011 16
6.1.7 Dew sensor power
Menu

Setup

Service

Dew sensor power: Activate Dew sensor power to configure
a dew sensor to be powered by CF-MC Master Controller (only output 5 can be used).
Status of output 5 is displayed:
• If output 5 is in use, Remote Controller tells you where.
• If nothing is installed on output 5,
Sensor not detected is displayed.
• If a dew sensor is installed on output 5, the power status is displayed as ON or OFF .
Select Change to change the power status.
• Confirm the changes with Yes or discard the changes with No .
7. Uninstallation
Resetting CF-RC Remote Controller (fig. 1)
• At the same time, activate the Soft key 1  , the soft key 2  and the down selector  .
• Remote Controller requests confirmation before resetting. Confirmation with Yes resets
Remote Controller.
• Confirm reset with Yes . Remote Controller is now ready for installation to a Master
Controller.
Note: Please see Master Controller instruction for further details.
8. Specifications
Cable length (power supply) 1.8 m
Transmission frequency 868.42 MHz
Transmission range in buildings (up to) 30 m
Number of Repeater Units in a chain (up to) 3
Transmission power < 1 mW
Supply voltage 230 VAC
Ambient temperature 0-50°C
IP class 21
Instruction CF-RC Remote Controller