Danfoss 088U0221, Инструкция

Страница: 12 / 20

Danfoss Heating Solutions VIUHM602 © Danfoss 03/2011 12
The Alarm log saves the latest alarms for later access and easy system failure identification.
When no error is causing an alarm, you can access the Alarm log through the Setup menu
(see chapter 5.3).
6. Service Menu
6.1 Service
Menu  Setup  Service: Activate Setup  Service to access a list service options.
Service
Output configuration
Standby temperature
Forecast
Low Energy Optimizer
Heating/Cooling
Relay configuration
Dew sensor power
OK Back
6.1.1 Output configuration
Menu  Setup  Service  Output configuration: Activate Output configuration to
configure the outputs for:
• Floor: the system is automatically set to PWM regulation.
• Radiator: the system is automatically set to PWM regulation.
• Mixed: floor and radiator heating can be selected individually for separate rooms.
Activate Mode rooms to get a list of rooms and select type mode for each room.
6.1.2 Standby temperature
Menu  Setup  Service  Standby temperature: Activate Standby temperature to set a
fixed room temperature (5-35°C) for all room thermostats, when the Global standby input
is activated on Master Controller (see instruction for CF-MC Master Controller for installa-
tion details).
6.1.3 Forecast
Menu  Setup  Service  Forecast: Activate Forecast to enter the Forecast mode. Press
Change to set the mode to:
• Enabled (all): all room thermostats in the system are set to Forecast mode.
• Disabled (all): all room thermostats in the system are disabled from Forecast mode.
• Mixed: Forecast mode can be activated for each room individually.
Instruction CF-RC Remote Controller