Danelec DM700 ECDIS, Руководство по установке

Страница: 39 / 67

Installation manual for DM700 ECDIS
Copyright Danelec Marine A/S
MAN11805-10 Page 39/67
2. Enter parameters in corresponding fields.
3. To apply the parameters, press the [Apply] button.
4. You are prompted for the MASTER password. (use the SERVICE password)
5. To apply, go to the Main Menu

Settings

Vessel

Vessel particulars

Ship
static data
6. Enter source identifier in the Source identifier field. Source identifier is the talker ID of
the primary GPS device used for positioning the own vessel.
7. Set the DTE indicator switch to the On position to indicate to an application on the
receiving side that the transmitting station conforms at least to the minimum keyboard and
display requirements. If not, set the switch to the
Off position.
8. Other parameters are filled with values specified in the MMSI, ship name, call sign, etc.
panel and in the Vessel dimensions and performance characteristics panel.
9. To apply the parameters, press the [Apply] button.