Danelec DM700 ECDIS, Руководство по установке

Страница: 16 / 67

Installation manual for DM700 ECDIS
Copyright Danelec Marine A/S
MAN11805-10 Page 16/67
4 Recommended standard configuration
Please note the following when planning the installation:
Each DPU contains a computer for the ECDIS software and communication I/O Interface. When
connected properly, each I/O Interface in the cluster is able to send data to any ECDIS computer in
the cluster. With a few exceptions, there is no reason to connect a sensor to more than one port in
the cluster. A GPS, Gyro, Speed log or devices that can provide similar information must be
connected to all DPU’s for reason of redundancy
Port
Master Backup Planning
SI00 (-2) AIS ARPA targets
SI01 (-2)
SI02 (-2) GPS-1* GPS-2* GPS-1
SI03 (-2) Speed log Speed log
SI04 (-2) Gyro Gyro
Black: Mandatory sensor. Grey: Optionally sensor.
* Minimum one GPS (or a device that can provide the same information) must be connected to
Master and Backup ECDIS.