d&b audiotechnik Z5778, Руководство по монтажу

Страница: 22 / 27

Arrays and assembly procedures
4.4 Mixed array configuration
4.4.1 Remarks and limitations
NOTICE!
For a mixed setup, the Z5779 XSL-SUB Mounting frame must
always be used as a suspension device while the Z5783 XSL-SUB
Adapter frame is required in addition.
The Z5779 XSL-SUB Mounting frame allows mixed array
configurations with a maximum total system weight of 500 kg
(1100 lb) - SWL including all rigging components.
4.4.2 Order of assembly
Setting up a mixed array configuration is split into four assembly
procedures:
1. Set up the SUB assembly.
2. Attach the Adapter frame.
3. Attach the first TOP cabinet to the Adapter frame.
4. Add further TOP cabinets.
1. Set up the SUB assembly
NOTICE!
In connection with a mixed array configuration with SUB cabinets
at the top of the array, subsequent SUB cabinets must always be
connected with
0° splay.
Setting up the SUB assembly is performed in the same manner as
described in
Þ
Chapter 4.3 "XSL-SUB column" on page 20 .
2. Attach the Adapter frame
1. At the front, release the Locking pins of the Front links on both
sides.
2. Attache the frame to the slots of the cabinet's front rigging
strand.
3. Reinsert the Locking pins on both sides.
4. At the rear, check the Rear link of the cabinet is properly fitted
into the rear rigging slot of the frame and reinsert both Locking
pins.
d&b Z5778/Z5779 Rigging manual 1.2 en 22