Danaher Motion Standalone MMC, Руководство по оборудованию, Страница: 47 / 182

Standalone MMC Hardware Manual 47
Danaher Motion
version 15.1
Standalone MMC Control
Figure 4-2: Block I/O Breakout Box Dimensions
4.5.3 User Port
The 15-pin HD male D-sub User Port connector (labeled “USER PORT” on the front of
the Control) provides RS232 and RS485 serial communication between a serial
device and the Control
•
Pin descriptions are provided in Table 4-13
•
Pin assignments are provided in Table 4-14
•
The available Flying Lead cable is described in Table 4-15.
•
The available RS-232 Exter HMI cable is described in Table 4-16.
•
The available RS-485 Exter HMI cable is described in Table 4-17.
•
Available Breakout Boxes and Cables are described in Table 4-18 .
•
Breakout Box dimensions are shown in Figure 4-3
1.750”
2.250”
3.000”
1
6
1.750”
5
9