manualshive.com logo in svg

Danaher Motion Standalone MMC, Руководство по оборудованию, Страница: 13 / 182

Поделиться
Скачать
Danaher Motion Standalone MMC Скачать руководство пользователя страница 13

Standalone MMC Hardware Manual

13

Danaher Motion

version 15.1

Safety Precautions

Danger, Warning, or Caution warning

Hot Surface warning

2.4

Safety First

Danaher Motion equipment is designed and manufactured with consideration and 
care to generally accepted safety standards. However, the proper and safe 
performance of the equipment depends upon the use of sound and prudent operating, 
maintenance and servicing procedures by trained personnel under adequate 
supervision.

For your protection, and the protection of others, learn and always follow these safety 
rules. Observe warnings on machines and act accordingly. Form safe working habits 
by reading the rules and abiding by them. Keep these safety rules handy and review 
them from time to time to refresh your understanding of them.

2.5

Safety Inspection    

2.5.1

Before Starting System

•

Ensure that all guards and safety devices are installed and operative and all doors 
which carry warning labels are closed and locked.

•

Ensure that all personnel are clear of those areas indicated as potentially hazard-
ous.

•

Remove (from the operating zone) any materials, tools or other objects that could 
cause injury to personnel or damage the system.

•

Make sure that the control system is in an operational condition.

•

Make certain that all indicating lights, horns, pressure gauges or other safety 
devices or indicators are in working order.

2.6

After Shutdown 

Make certain all controlled equipment in the plant is safe and the associated electrical, 
pneumatic or hydraulic power is turned off. It is permissible for the control equipment 
contained in enclosures to remain energized provided this does not conflict with the 
safety instructions found in this section.

Symbol plus DANGER, WARNING or CAUTION: 
These notices provide information intended to prevent potential 
sonal injury and equipment damage. 

Symbol plus HOT SURFACE:
These notices provide information intended to prevent potential pe
sonal injury.

Содержание Standalone MMC























































































































































































Отзывы:

Нет отзывов