DANA TM4 SUMO MD MV, Руководство по устранению неисправностей

Страница: 24 / 182

24
Diagnostics
Diagnostics
This section covers the equipment and procedures
used to diagnose the system.
Diagnostics Tool
TM4 ODIN Tool
All Events are recorded in the SysFile and can be
viewed using the TM4 ODIN diagnostic tool. Events
categorized as Errors are dysfunctional event and
cause the product to cease operation. Warnings and
Information level events are also registered. Some
warnings could require to be addressed even though
the system remains operational.
Requirements
There are a number of required Files and Tools in
order to use the TM4 ODIN tool correctly:
•
PC with Windows 10 (Windows 7, 8 with
limited access).
•
Software extraction .zip (7zip, WinRar…).
Note: Windows XP and lower version are no longer
supported.
•
Any of the supported CAN interfaces below:
o
Kvaser: USB cable interfaces.
o
PEAK System: PCAN-USB, PCAN-PCIe
and PCAN-USB Pro interfaces.
o
Vector: Vector XL-Interface family, for
example, CANcaseXL, CANboardXL,
CANcardXLe and CANcardLe and the
VN16XX series, are all supported by
TM4 ODIN.
•
Drivers appropriate to the CAN interface.
•
Cable required to connect the CAN interface
to the Dana TM4 product. CAN interface.
•
Latest version of TM4 ODIN.
The latest version of TM4 ODIN can be downloaded
from the Dana TM4 extranet:
https://extranet.tm4.com/
Note: Contact Dana TM4 if there is any issue during
the installation or configuration of TM4 ODIN.
Note: We will refer the TM4 ODIN software by
“ODIN”.