Dalsa spyder SG-10-01k80, Руководство пользователя

Страница: 49 / 112

Spyder3 GigE User’s Manual PRELIMINARY
DALSA 03-032-10158-04
49
4. Click Save .
To view the error report:
1. Select View → Error Report .
In the Open dialog box:
2. In the Look in list, click the drive or folder that contains the error report you want to
open.
3. In the folder list, locate and open the folder that contains the error report.
4. Click the error report, and then click Open .
6.2 Specific Solutions
No Output or Erratic Behavior
If your camera provides no output or behaves erratically, it may be picking up random
noise from long cables acting as antennae. Do not attach wires to unused pins. Verify that
the camera is not receiving spurious inputs (e.g. EXSYNC if camera is in exposure mode
that requires external signals).
Line Dropout, Bright Lines, or Incorrect Line Rate
Verify that the frequency of the internal sync is set correctly, or when the camera is set to
external sync that the EXSYNC signal supplied to the camera does not exceed the
camera’s useable Line rate under the current operating conditions.
Noisy Output
Check your power supply voltage outputs for noise. Noise present on these lines can
result in poor video quality.
Dark Patches
If dark patches appear in your output the optics path may have become contaminated.
Clean your lenses and sensor windows with extreme care.
1. Take standard ESD precautions.
2. Wear latex gloves or finger cots
3. Blow off dust using a filtered blow bottle or dry, filtered compressed air.
4. Fold a piece of optical lens cleaning tissue (approx. 3" x 5") to make a square pad that
5. is approximately one finger-width
6. Moisten the pad on one edge with 2-3 drops of clean solvent—either alcohol or
acetone. Do not saturate the entire pad with solvent.
7. Wipe across the length of the window in one direction with the moistened end first,
followed by the rest of the pad. The dry part of the pad should follow the moistened