manualshive.com logo in svg

Dalsa spyder SG-10-01k80, Руководство пользователя

Поделиться
Скачать
Dalsa spyder SG-10-01k80 Скачать руководство пользователя страница 44

 

PRELIMINARY 

Spyder3 GigE User Manual 

03-032-10158-04  

DALSA 

44 

5.3 Cleaning the Sensor Window 

1.

 

Use compressed air to blow off loose particles. This step alone is usually sufficient to 
clean the sensor window. 

2.

 

If further cleaning is required, use a lens wiper moistened with alcohol or acetone. 

3.

 

We recommend using lint-free ESD-safe cloth wipers that do not contain particles that 
can scratch the window. The Anticon Gold 9”x 9” wiper made by Milliken is both ESD 
safe and suitable for class 100 environments. Another ESD acceptable wiper is the 
TX4025 from Texwipe. 

4.

 

An alternative to ESD-safe cloth wipers is Transplex swabs that have desirable ESD 
properties. There are several varieties available from Texwipe. Do not use regular 
cotton swabs, since these can introduce charge to the window surface. 

5.

 

Wipe the window carefully and slowly. 

6.

 

When cleaning long linear sensors, it may be easier to wipe along the width (i.e. as 
opposed to the length) of the sensor. 

Содержание spyder SG-10-01k80

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды