manualshive.com logo in svg

Dalsa spyder SG-10-01k80, Руководство пользователя

Поделиться
Скачать
Dalsa spyder SG-10-01k80 Скачать руководство пользователя страница 20

 

PRELIMINARY 

Spyder3 GigE User Manual 

03-032-10158-04  

DALSA 

20 

2.2 Equipment Recommendations 

PC Requirements 

To achieve best performance, the following minimum requirements are recommended: 

•

 

Processor: AMD Athlon XP 2000+ or Intel P4 2.0GHz 

•

 

Memory: 512MB DDR-RAM PC2700 

•

 

Motherboard: Mid-end without embedded graphic card. Avoid using onboard video 
cards as they may compete with other components for shared memory. 

•

 

VGA card: Nvidia GForce 2 or better (ATI not recommended). Some ATI video cards 
will use a high amount of the PCI bandwidth and compete with other components, 
such as the GigE network card. This may lower the expected data rate of applications. 

•

 

GigE network adapter (either PCI card or LOM): For high performance, you must use 
a Intel PRO/1000 MT adapter 

•

 

Operating system: Windows 2000 (SP4), Windows XP Professional 

Network Adapter Requirements 

The Spyder3 GigE camera works only with network adapters based on the Intel 82546, 
82541, and 82540 network chips. The driver will also function with adapters based on the 
Intel 82544 chip, but these are not recommended due to bugs in the chip that can cause 
control packets to be lost if sent while data is streaming.   

The PCI ID for some OEM network adapters may not be automatically recognized by the 
Spyder3 GigE camera. If this occurs, contact DALSA to obtain an updated INF file.  

The following four Intel network adapters are recommended and are the only adapters 
that are compatible with the high performance driver: 

1.

 

Intel® Pro/1000 GT Desktop Adapter (33-MHz, 32-bit PCI): 

http://www.intel.com/network/connectivity/products/pro1000gt_desktop_adapte
r.htm

 

Order Code: PWLA8391GT (single packs) 

 

2.

 

Intel PRO/1000 MT Server Adapter (up to 133-MHz, up to 64-bit PCI-X) Family: 

http://www.intel.com/network/connectivity/products/server_adapters.htm

 

Order Code: PWLA8490MT (single packs) 

Order Code: PWLA8490MTBLK5 (five packs) 

3.

 

Intel® PRO/1000 MT Dual Port Server Adapter 

Order Code: PWLA8492MT (Single Packs) 

Order Code: PWLA8492MTBLK5 (Five Packs) 

Содержание spyder SG-10-01k80

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды