background image

76

DIS-1/S and DIS-1/L

Dallmeier electronic GmbH & Co.KG

Diagram 10-1

10 Export function

The DIS includes an export function for archiving pictures and picture
sequences to external media such as CD-ROMs.

!

Click export.

The number of tracks created are displayed for
export (see chapter 8.1.1, Creating tracks).
The  Settings selection also is accessible.

Tracks only are displayed when the export
function has been activated (see 10.1,
Suppressing the export function).

10.1 Suppressing the export function

The export function can be suppressed for the DIS. When this is done,
the 5 GB of memory reserved for the image file can be accessed for
recording.

!

Click Export => Settings.

!

Remove the mark in the checkbox next to

Export available.

The export function now is suppressed and it
is no longer possible to export pictures or picture
sequences.

The export function can be reactivated at any
time when an export is desired.

If the memory for the image file is subsequently activated, the pictures
already recorded in the 5 GB memory are deleted. This, however,
only applies to the oldest pictures (from the beginning of the track).
If multiple hard disks and partitions are installed, the „oldest pictures“
will be deleted from the bottommost track in the „Track settings/
data storage tab
“ dialog box (see chapter 8.1.1, Creating tracks).

Diagram 10-2

Содержание DIS-1/S


































































































Отзывы: