22
DIS-1/S and DIS-1/L
Dallmeier electronic GmbH & Co.KG
6.2.2
Bit rate display
The setting in this window (A) determines what is shown in the menu bar
at the bottom (B).
When Track is selected, the bit rate set in the
Track settings menu is shown.
When Current is selected, the bit rate currently
being used for recording is shown.
When Average is selected, the average bit rate
for the current recording session is shown.
6.2.3
Single step mode
Here you can choose whether you want to move forward from one half-
picture to the next half-picture or from full picture to full picture in the
Forward – single picture playback function (see chapter 9).
6.2.4
Displaying date and time
Tick the checkbox located next to Display date/time if the date and time
are to be included in the picture during playback and Live-Mode.
6.2.5
Auto repeat
If the checkbox along side Auto repeat is marked, playback will take place
in a loop. In this case, when the last picture is reached the recording will be
played back again from the first recorded picture in the track.
Please note that recording should be switched off during this
playback function, as the last picture otherwise will not be reached
(due to constant recording), thereby prohibiting an automatic repeat
of the playback from the track start.
A
B
Diagram. 6-6
