DF3000IP(-DN) / DF3000IP(-DN) CasinoCam
®
38
Dallmeier electronic
10.3.1
Mode
The transfer protocol and encoding of the audio and video data are defined in Mode. A
distinction is made between unicast and multicast for this purpose (see below).
MPEG
The audio and video data are encoded using the MPEG-2 program stream.
The encoder set as the Input must work in encoder mode MPEG-2 (Encoder settings).
The transfer is made in the form of a pure stream (without protocol).
RTP/MPV
The video data are encoded using the MPEG-2 standard (MPEG Video). The audio data
are not taken into consideration.
The encoder set as the Input must work in encoder mode MPEG-2 (Encoder settings).
The data will be sent using the RTP protocol, which optimizes the synchronization of the
data packets at the receiver.
The protocol implementation is based on the following standards:
RFC3550 RTP Transport Protocol for Real-Time Applications
RFC3551 RTP Profile for Audio and Video Conferences with Minimal Control
RFC2250 RTP Payload Format for MPEG-1/MPEG-2 Video
RTP/MP4V-ES
The video data are encoded using the MPEG-4 Elementary Stream Standard. The audio
data are not taken into consideration.
The encoder set as the Input must work in encoder mode MPEG-4 (Encoder settings).
The protocol implementation is based on the following standards:
RFC3550 RTP Transport Protocol for Real-Time Applications
RFC3551 RTP Profile for Audio and Video Conferences with Minimal Control
RFC3016 RTP Payload Format for MPEG-4 Audio/Visual Streams
RTP/MJPEG
The video data are encoded using the MJPEG standard. The audio data are not taken into
consideration.
The encoder set as the Input must work in encoder mode MJPEG (Encoder settings).
The protocol implementation is based on the following standards:
RFC3550 RTP Transport Protocol for Real-Time Applications
RFC3551 RTP Profile for Audio and Video Conferences with Minimal Control
RFC2435 RTP Payload Format for JPEG-compressed Video
