DALEMANS U-V6, Инструкция по эксплуатации

Страница: 47 / 67

DALEMANS sa/nv
Rue Jules Mélotte 27A
B-4350 Remicourt
+32 19 33 99 43
U•V6 Instruction Manual
46 | 65
Certified
ISO9001 • VCA
www.dalemans.com
▪
The POWER LED turns off
▪
The BATTERY LED lights up, but the power fault is not activated, i.e. the
FAULT LED stays off.
This transition to battery-power operation is ended by one of the following:
▪
the user pressing ESC
▪
the menu idle time expiring.
5.2 Configuration Menu
Configuring the Measurement Channels
Once a measurement channel has been selected, the Channels Menu allows the user to do
the following:
▪
assign a location to the detector
▪
set the detector to offline
a) Locating a Detector
Navigation :
Service menu
→
Configuration menu
→
Channels menu
→
Channel location
The location in the U•V6 unit allows the user to identify the detectors that are connected. By
default, it is in the form
Detector x,
where x is the number for the detector input on the U•V6
unit.
The user may assign a location to a detector in two different ways:
▪
Preset Location
▪
Custom Location
These two methods may be combined by customising a location that has previously been
chosen from the list of preset locations.
i) Preset Locations
The U•V6 unit proposes a list of preset locations. This is available in three languages
(English, Dutch and French). For details of the list, see
Annex D : Predefined locations
The user selects the location from the list using the Up and Down arrow keys.
When the title of the location allows it (display is limited to 20 characters), an index from 1 to
9 may be added using the
Right and Left arrow keys. Depending on the item selected, it
may also be possible to select other variants. See Annex E: Characters available for text
edition
The user confirms their choice of location by pressing ENTER .
The user may interrupt and cancel their choice of location by pressing ESC .