Daktronics P1314 Скачать руководство пользователя страница 5

Страница: 5 / 36

Introduction

1 Introduction

This manual explains the operation of the All Sport

CG (Character Generator) with HD

(High Definition) video input and output. For additional information regarding safety,

installation, operation, or service, refer to the telephone numbers listed in

Section 5:

Daktronics Exchange and Repair & Return Programs (p�17)

Important Safety Instructions

•  Read and understand all instructions before beginning the installation process.
•  Do not drop the control equipment or allow it to get wet.
•  Do not disassemble control equipment; failure to follow this safeguard will make the

warranty null and void.

• Always unplug the control equipment when it is not in use. Never yank the power

cord to pull the plug from the outlet. Grasp the plug and pull to disconnect.

• Do not let any power cord touch hot surfaces or hang over the edge of a table that

would damage or cut the cord.

• If an extension cord is necessary, a three-pronged, polarized cord should be used.

Arrange the cord with care so that it will not be tripped over or pulled out.

• Inspect console for shipping damage such as rattles and dents, and verify that

all equipment is included as itemized on the packing slip. Immediately report any

problems to Daktronics; save all packing materials if exchange is necessary.

Resources

Figure 1

illustrates a Daktronics drawing label.

This manual refers to drawings by listing the last

set of digits. In the example, the drawing would

be referred to as

DWG-1007804

. All references to

drawing numbers, appendices, figures, or other

manuals are presented in bold typeface.

Any drawings referenced in a section are listed

at the beginning of it as shown below:

Reference Drawing:

System Riser Diagram .......................................................................................

DWG-1007804

Daktronics identifies manuals by the DD or ED number located on the cover page.

Control Consoles

The All Sport CG HD may be used with an All Sport

controller. These consoles use

keyboard overlays (sports inserts) to control numerous sports/events and scoreboard

models. Refer to the following manuals for operating instructions:
•

All Sport 5000 Series Control Console Operation Manual (ED-11976)

•

All Sport 5500 Series Control Console Operation Manual (ED-16809)

These manuals are provided on a CD with the control console, and they are also

available online at

www.daktronics.com/manuals

Drawing Number

Figure 1:

Drawing Label

Содержание P1314





































Результаты поиска

Содержание P1314

Отзывы:

Похожие инструкции для P1314

Бренды по названию

Популярные бренды

Daktronics P1314, Руководство по эксплуатации

Результаты поиска

Содержание P1314

Отзывы:

Похожие инструкции для P1314

Бренды по названию

Популярные бренды