Setup
3
2 Setup
Use the tables and figures below to identify the various jacks that are used to connect
components to the All Sport CG:
Jack
Description
VIDEO IN
(HDMI)
Receives the HDMI video feed from camera or other source.
VIDEO OUT
(HDMI)
Sends the HDMI video feed with overlaid game-in-progress information to
recording device.
Figure 2:
All Sport CG, Bottom View
Jack
Description
Antenna
Radio Unit Only.
Receives game-in-progress information from the All Sport
controller via wireless radio signal (both All Sport CG and control console must
be equipped with optional radio kits).
DATA
(DB9-M)
Receives the game-in-progress information from the All Sport controller via a
direct wire connection.
CONTROL
(DB9-F)
Receives firmware upgrade information; also used to output TV data feeds and
upload custom graphics. Refer to
Appendix B
.
POWER
Receives power via power adapter.
Figure 3:
All Sport CG, Top View
Power Connection
The All Sport CG receives power from a standard 120 VAC outlet via a power adapter
to the
POWER
jack on top of the All Sport CG. Plugging in and disconnecting the power
adapter will power the unit on and off.
When first powered on, the unit performs the standard boot-up sequence shown below:
DAKTRONICS
ALL SPORT CG-HD
CPLD: ED15105
EPLD: ER-2931415
VERSION X.Y
Bootloader Firmware X.Y = Firmware Version Number
Содержание P1314
Страница 24: ...This page intentionally left blank ...
Страница 28: ...This page intentionally left blank ...
Страница 32: ...This page intentionally left blank ...
Страница 36: ...This page intentionally left blank ...