Daktronics BA-1018, Руководство пользователя

Страница: 9 / 216

Schematics: power wiring, signal wiring, panelboard or power termination
panel assignments, signal termination panel assignments and transformer
assignments
Final assembly: component locations, part numbers, display dimensions
and assembly/disassembly instructions
All references to drawing numbers, appendices, figures, or other manuals are
presented in
bold typeface, as in this example: “Refer to Drawing A-69945 for the
location of the driver enclosure.” Additionally, any drawings referenced within a
particular subsection are listed at the beginning of that subsection in the following
manner:
Reference Drawing:
Segmentation, 7 Seg Bar Digit................................ Drawing A-69945
Daktronics identifies manuals by their engineering document (ED) number, which is
located on the cover page of the manual. For example, this manual would be referred
to as
ED-13770 .
The serial and model numbers of a Daktronics scoreboard can be found on the ID
label on the display. The label will be similar to the one shown in
Figure 2 . When
calling Daktronics Customer Service, please have this information available to
ensure quick service. For future reference, note the scoreboard model number, serial
number and installation date on the second page of this manual.
Figure 2: Scoreboard ID Label
Daktronics displays are built for long life and require little maintenance. However,
from time to time, certain display components will have to be replaced. The
Replacement Parts List in
Section 8.7 provides the names and part numbers of
components that may require replacement during the life of this display.
Following the Replacement Parts List is an explanation of Daktronics exchange and
repair and return programs. Refer to these instructions if replacing or repairing any
display component.
1-2 Introduction