Configure computers:
Computer keyboard
Here you can assign which type of keyboard interface is used. To change
the computer keyboard type, press enter while a keyboard field is high-
lighted. A computer keyboard input box appears, see Figure 11.
Use the arrow keys to select the desired keyboard type and hit enter. The
input box disappears and the new keyboard type is then shown in the ap-
propriate keyboard field.
For PCs there are three possible keyboard modes: mode 1 (PC1), mode 2
(PC2), or mode 3 (PC3). Most PCs are mode 2 and you need not change
the default setting. If the computer is a Unix workstation or server, such as
an IBM RS/6000, SGI, HP, DEC, or other, then the computer should be
configured as PC mode 3.
Certain IBM brand PCs are either mode 1 or mode 2. There is no way to
know for sure except by booting that computer. You can however configure
for PC1 or PC2 and test if keyboard communication is correct. If in doubt re-
boot the computer. Upon completion of booting a computer, the correct
mode should be shown in the keyboard field. Make sure to save it with the
on-screen display or the keep command.
20
ULTRAVIEW PRO INSTALLATION AND OPERATION MANUAL
Figure 11 Changing a computer's keyboard type
Configure computers
Number Computer name
Keyboard Mouse
1 Computer
1
PC2
PS/2
2 Computer
2
PC2
PS/2
3 Computer
3
PC2
PS/2
4 Computer
4
PC2
PS/2
5 Computer
5
PC2
PS/2
6 Computer
6
PC2
PS/2
7 Computer
7
PC2
PS/2
8 Computer
8
PC2
PS/2
9 Computer
9
PC2
PS/2
10Computer 10
PC2
PS/2
11 Computer 11
PC2
PS/2
12 Computer 12
PC2
PS/2
13 Computer 13
PC2
PS/2
14 Computer 14
PC2
PS/2
15 Computer 15
PC2
PS/2
16 Computer 16
PC2
PS/2
PC2
PC2
PC3
Apple
Sun
PC1
è
Type of computer keyboard used
