Dakewe(Shenzhen)Medical Equipment Co,. Ltd
19
V4.1
4.4.2 Hand Wheel Block Installation
Take the hand wheel block out of the accessory box.
Remove the 3M back adhesive layer of the block by hand (Figure 7-1).
Fit the block into the fastening screw hole on the hand wheel (Figure 7-2).
4.4.3 Unlock the Instrument Cover
The cover should be locked and cannot be opened when the instrument is shipped and in
normal operation.
Use the M5 Allen key to loosen the two top cover fixing screws (Figure 8-1).
After the screw is completely loose, flip up the top cover to unlock.
Upper cover fixing screw position
Figure 7 The procedure of hand wheel block installation
Figure 8 The picture of upper cover fixing screw position
The top cover can be opened by loosening the screw for 5~8 cycles, and the screw does not have to
be taken out. When the top cover is locked, it is also tightened for 5~8 cycles. Make sure that the
screw can support the top cover properly. Continue to tighten the screw, which will cause the top
cover to deform or even rupture.
