Dakewe(Shenzhen)Medical Equipment Co,. Ltd
22
V4.1
Referring to Fig. 8, after unlocking the top cover, hold both sides of the top cover and rotate
upward to open it.
Place the glass door in the freezer compartment slot, with the handle facing up in the
direction of the illustration (Figure 12).
After completion, check whether the conductive strips on the left and right sides are in full
contact with the conductive electrodes of the glass door.
Finally, pull the glass door handle up and down to slide the glass door.When the machine
works normally,close the upper cover and lock it.
4.4.8 Power Supply Cable Connection
This unit comes with a power cord that connects the unit to a power outlet.
Precautions:
The voltage supplied by the power socket must match the voltage indicated on the slicer's
nameplate.
4.5
Boot Preparation
After transporting and moving,the machine must be stand for more than 2 hours before
starting up for the first time.
Check that the local grid voltage matches the voltage on the machine nameplate.
Check that the tool holder is installed in place and locked on the tool holder mounting plate
of the freezer compartment.
Put the waste slot, brush, No. 4 hook pen, front brush holder, blade and other utensils into
the freezer compartment for pre-cooling.
Close the glass door.
