Daitsu FDLA-09 Скачать руководство пользователя страница 162

Страница: 162 / 322

Page

of 77

SK2019 FCSD(H)-V/P-ECM-001

AUTOMODE

Auto cool/heat/heat with electric heater as booster

Every time the unit is turned on, MTV1 is on, AUX1, AUX2 and fan are off. MTV2 and heater are always off.

After 120secs, the subsequent operation mode is decided according to the following programs:

If the coil temperature sensor (Ti1) ≥ 36ºC, then MTV1, AUX1 and fan turn on or off according to HEAT mode.

If Ti1 < 36ºC, then MTV1, then AUX2 and fan turn on or off according to COOL mode.

Unit remains in AUTO COOL or AUTO HEAT mode throughout the operating cycle until the user changes the mode manually or
restarts the unit.

Should the Ti1 sensor be damaged, auto mode will not function.

Auto heat with electric heater as primary heat source / all configuration auto changeover

If current running mode is auto cool mode, then the control logic will change over to auto heat mode when all the following
conditions are met:

Ts-Tr ≥ 1.0°C (or 4 ºC if economy contact is activated)

MTV1 has stop ≥ 10 min.

If current running mode is auto heat mode, then the control logic will change over to auto cool mode when all the following
conditions are met:

Tr-Ts ≥ 1.0°C (or 4 ºC if economy contact is activated)

MTV1 has stop ≥ 10 min.

Note: Auto cool or auto heat operation are the same as cool or heat mode respectively.

Содержание FDLA-09



































































































































































































































































































































Результаты поиска

Содержание FDLA-09

Отзывы:

Похожие инструкции для FDLA-09

Бренды по названию

Популярные бренды

Daitsu FDLA-09, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание FDLA-09

Отзывы:

Похожие инструкции для FDLA-09

Бренды по названию

Популярные бренды