Daitsu FDLA-09 Скачать руководство пользователя

Страница: 185 / 322

Page

of 77

SK2019 FCSD(H)-V/P-ECM-001

Press

to confirm settings and exit. If no operation within 6 seconds, it will automatically exit and the setting will not be

saved.

When DIP SW1=ON, set point temperature is fixed. In cooling mode, set point temperature is 24

℃

. In heating mode, set point

temperature is 21

℃

When DIP SW1=OFF, temperature can be set from 16

℃

to 30

℃

When DIP SW2=ON, set point temperature is shown on temperature display area.

When DIP SW2=OFF, room temperature is shown on temperature display area.

Mode setting

Press

to set COOL, HEAT, FAN or DRY mode alternatively.

Key Lock

Press

and

to set key lock function. Key lock icon is on or off when key lock function is set to on or off.

Fan speed setting

Press

to set LOW, MEDIUM, HIGH or AUTO speed.

ON/OFF setting

Press

to turn on or off the unit.

10.

Temperature unit setting

Press

and

at the same time to change temperature unit between Celsius and Fahrenheit.

11.

Network control (Only master unit can control slave units)

Press

four times to set network control and “Network” icon is on. The slave unit number is blinking in real time display

area.

Press

to select slave unit which is online. The offline slave unit number is not shown.

Press

to select parameters: ON/OFF unit, temperature, mode, fan speed, swing and sleep.

Press

to set the selected parameter.

ON/OFF unit: Press

button once, “H” blinks in master-slave display area, then press

to turn on unit (“H” blinks)

or turn OFF unit (“S” blinks).

Temperature: Press

twice, temperature blinks in temperature display area, then press

to set

temperature.

Mode: Press

three times, Mode icon blinks in mode display area, then press

to select mode.

FAN SPEED: Press

four times, fan speed icon blinks in fan speed display area, then press

to set fan speed.

Sleep: Press

five times, sleep icon blinks then press

to set sleep mode.

Press

to confirm settings and exit. If no operation within 6 seconds, it will automatically exit and the setting will not be

saved.

12.

Global control setting

Press

five times to set global control and “Network” icon blinks.

Press

, timer on/off icon blinks and all slave units’ timer on/off function setting are cancelled.

Содержание FDLA-09



































































































































































































































































































































Результаты поиска

Содержание FDLA-09

Отзывы:

Похожие инструкции для FDLA-09

Бренды по названию

Популярные бренды

Daitsu FDLA-09, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание FDLA-09

Отзывы:

Похожие инструкции для FDLA-09

Бренды по названию

Популярные бренды