DAITEM 473-29X, Руководство по установке

Страница: 10 / 44

10
4.1 Essential programming (language, date/hour, size of codes and installer code)
4. Main programming operations
How to use the keys on the keypad
• Pressing (all keys) briefly: this is the most usual way to press keys in order to browse through the various menus and sub-menus, or
validate/cancel a parameter or digit.
• Pressing and holding the (OK) key: validates choices.
• Pressing and holding the (C) key: exits a menu without validating choices.
During programming , the dialler switches to standby mode and the display goes blank if no key is pressed for 2 min. The screen will
light up again when any key is briefly pressed.
1. When the dialler is first powered it is in
installation mode and displays:
4. Perform the following essential programming operations as shown below:
2. Select the language using the
L
and
M
keys and then press OK.
3. Select the date and hour using
the
L
and
M
keys
and then press OK.
Bonjour
473-29X
Langue
Francais
Language
English
General
Date/hour
then
Programming Display Actions to be performed
to be performed
Programming
Select the Date/Hour menu using the
L
and
M
keys,
the date and hour then press OK
Programming the date using keys 0 to 9.
The
L
and
M
keys can be used to place the cursor on the digit to be modified
Programming the hour using keys 0 to 9.
The
L
and
M
keys can be used to place the cursor on the digit to be modified
Programming Select the Code size menu using the
L
and
M
keys,
the installer code then press OK
Default installer
code: 1111
Default master
The installer code size and master code size is 4 by default.
code: 0000 Press key 5 or 6 and then OK to change the size.
NB: the code size can only be changed when the 2 codes have their factory-set
values
Select the Install code menu using the
L
and
M
keys,
then press OK
Press OK
Change the installer code using keys 0 to 9.
Press OK.
General
Date/hour
Date/hour
Date
General
Code size
Date/hour
Hour
Code size
4
General
Install code
Install code
Change
Install code
1 1 1 1
Programming
General
INST
ALLA
TION
MODE