SiBE281013
Field Setting from Outdoor Unit PCB
Field Setting
73
3.2.3 Setting Mode 2
In this mode, settings for the following items can be made.
The figures in the columns under "No." represent the number of times to push the
SET (BS2) button.
Setting of Demand 2 operation
With this setting, compressor operation can be controlled to reduce power consumption.
(60% - 80% demand is available when a demand adapter (optional accessory) is used.)
[Work procedure]
No.
Display of setting items
Display of setting condition
Setting item
LED display
Setting condition
LED display
H1P H2P H3P H4P H5P H6P H7P
H1P H2P H3P H4P H5P H6P H7P
3
Demand 2
operation
k h h h h k k
30% demand
40% demand (factory
setting)
50% demand
k h h h k h h
k h h h h k h
k h h h h h k
28
Refrigerant
recovery mode
k h k k k h h
OFF (factory setting)
ON
k h h h h h k
k h h h h k h
Setting item
Setting condition
Description
Demand 2 operation
30% demand
Operates with 30% of rated
power consumption.
40% demand (factory setting)
Operates with 40% of rated
power consumption.
50% demand
Operates with 50% of rated
power consumption.
h
: OFF
l
: BLINK
k
: ON
Operating procedure
H1P H2P H3P H4P H5P H6P H7P
Push and hold the MODE (BS1) button of "Setting mode 1" for 5 seconds
or more and set to "Setting mode 2."
k h h h h h h
Push the SET (BS2) button three times to set the LED display as shown
in the table on the right.
k h h h h k k
Push the RETURN (BS3) button once. (Present settings are displayed.)
k h h h h l h
Push the SET (BS2) button to set the LED
display as shown in the table on the right.
30% of rated power consumption
k h h h l h h
40% of rated power consumption
k h h h h l h
50% of rated power consumption
k h h h h h l
Push the RETURN (BS3) button once to make a
decision.
30% of rated power consumption
k h h h k h h
40% of rated power consumption
k h h h h k h
50% of rated power consumption
k h h h h h k
Push the RETURN (BS3) button once again for execution. (The LED
display is in the initial status of "Setting mode 2".)
k h h h h h h
Push the MODE (BS1) button once to return to Setting mode 1 (normal
operation).
h h h h h h h
Press the MODE (BS1) button for 5
seconds and set to “Setting mode 2”.
Press the SET (BS2) button and set the
LED display to a setting item (
∗
1).
↓
Press the RETURN (BS3) button and
decide the item.
<Selection of setting items>
<Selection of setting conditions>
Press the SET (BS2) button and set to
the setting condition you want.
↓
Press the RETURN (BS3) button and
decide the condition.
Press the RETURN (BS3) button and
set to the initial status of “Setting mode
2”.
∗
If you become unsure of how to proceed, push the MODE (BS1) button and return to setting mode 1.
