Daikin FXFQ-PVJU, Инженерные данные

Страница: 53 / 90

Control Devices EDUS391000-C
52 Controls

Attach the lower part to the electrical box (part to be procured in the field) with the provided installation screws.
(Select a flat face as an installation place. Do not tighten the installation screws excessively not to damage the lower
part of the remote controller.)
For part to be procured in the field electrical box, use KJB211AA (optional accessory).
2. Initial Setting
1. Setting connector for individual use (X1A) (Factory set : OFF) (Set for individual use only)

For individual use of schedule timer
Insert the connector attached with the body case on the PC board.

For combined use with other optional controllers for centralized control
Do not change the factory setting.
2. Control mode selector (SS2) (Set for individual use only)
By changing the switch, setting mode of individual and centralized operation is available.
Note:
When used with other optional controllers, control mode of central remote controller and unified ON/OFF controller have
the priority.
3. Setting of the sequential operation function
The schedule timer is equipped with a sequential operation function that sequentially turns indoor units on in 2-
second intervals during unified operation.
(Sequential operation is factory set to “ON.”)
To switch sequential operation ON or OFF, set as follows.
Note:
The sequential operation function is designed to reduce the load on the power supply equipment, but does not guarantee
that compressors will not be started simultaneously. You cannot therefore count on a capacity reduction effect by power
supply equipment breaker selection.