Daikin FXFQ-PVJU, Инженерные данные

Страница: 47 / 90

Control Devices EDUS391000-C
46 Controls
5. Control Mode Selector (DS2)
The following four patterns of control mode can be set.
Note:

“

” Indicates the position of switches.

Set control mode before turning power supply ON.

When used in conjunction with central remote controller, the control modes of the central remote controller has the
priority.
6. Forced Reset Switch (SS1)
When changing the setting of the connector for setting master controller, etc., you can reset simply by setting it to the
reset side once and returning to the normal side, without turning the power OFF.
(For normal operation, set the switch to the normal side.)
Control Mode Individual Centralized Timer Operation Possible by
Remote Controller ON/OFF Control Impossible
by Remote Controller
Content Operation/stop is
controlled by both unified
ON/OFF controller and
remote controller. After operated by unified
ON/OFF controller,
operation/stop is freely
controlled by remote
controller until stopped by
unified ON/OFF controller. When used in conjunction
with schedule timer,
operation/stop is controlled
freely by remote controller
during the set time but
operation is not available
when schedule timer is ON. Operation/stop is controlled
by unified ON/OFF controller
only. (This unit can not be
operated/stopped by remote
controller.)
DS2 Setting
(Factory set)