Daikin FXFQ-PVJU, Инженерные данные

Страница: 37 / 90

Control Devices EDUS391000-C
36 Controls
4. Forced reset switch
When changing the setting of the connector for setting main controller, etc., you can reset simply by setting it to the reset
side once and returning to the normal side, without turning the power OFF.
(For normal operation, set the switch to the normal side)
5. Special Function Settings
Special functions on the central control system can be changed while in FIELD SETTING mode.
Setting Procedure
1.
=
Press and hold the INSPECTION/TEST RUN button for a period of four seconds or more to set the system to FIELD
SETTING mode.
2.
=
Use the TEMPERATURE ADJUSTMENT button to select a desired Mode No.

: Press to increase the Mode No.

: Press to decrease the Mode No.
3.
=
Press the CONTROL MODE (CODE No.) button to select a "Switch Setting No.".
4.
=
Press the SET button to determine the content of the setting changed.
Upon determination, the blinking the "Switch Setting No." will turn ON.
5.
=
Press the INSPECTION/TEST RUN button to return the system to NORMAL mode.
In this case, power supply is not needed to turn ON again.
Example: In case of no restriction items from the sub central remote controller while in double central control, make
setting of the Mode No. to "02" and the Switch Setting No. to "0".
C
4 2
1.5
3
SET
Mode No.
No. of Switch Setting