Daikin FXFQ-PVJU, Инженерные данные

Страница: 24 / 90

EDUS391000-C Control Devices
Controls 23

Cool/heat Selection Eligibility Setting by Remote Controller for Indoor Unit
The outdoor unit of can freely be selected the operation mode (fan, dry, auto [Heat Recovery only], cooling or heating) by
the remote controller for indoor unit. However, you have to set the selection eligibility for fan, dry, cooling and heating
operation on the one of the remote controller out of the indoor units connected to the outdoor unit. For Heat Recovery
series and the function unit (for heat recovery), if 2 or more indoor units are connected to one Branch Selector unit, you
have set the selection eligibility for fan, dry, auto, cooling and heating operation on the one of the remote controller out of
the indoor units connected to the Branch Selector unit.
(Only the remote controller having the selection eligibility can change the operation mode.)

Setting method of the selection eligibility for cool/heat
1. Preparation

When turning on the power first time, "CHANGEOVER UNDER CONTROL" sign blinks.
When you set;
Branch Selector u nit
Heat Reco v ery series
Indoor u nit
Contin u e to p u sh Operation s w itch
for a b o u t 4 seconds.
sign b links on all the indoor u nits
connected to the o u tdoor u nit or
Branch Selector u nit.
P u sh Operation s w itch of the remote
controller, w hich yo u w ant to set the
selection eligi b ility. This completes the
setting proced u re. Cool/heat selection
eligi b ility is set for that remote controller,
and sign goes off.
still
b links on all other remote
controllers.
P u sh Operation s w itch of remote
controller ha v ing the selection
eligi b ility (The remote controller not
displaying sign) se v eral times
to select the desired operation mode.
[Fan], [Dry], [A
u to](only for Heat Reco v ery
series),[Cooling] and[Heating] mode are
selected each time yo
u p u sh the
[Operation s w itch]. Operation mode of
other remote controllers, w hich has no
selection eligi b ility, is also s w itched
a u tomatically.
1
2
3
2. Selection Eli g ibility
Settin g
3. Operation mode
chan
g eover
Operation O N /OFF