SiBE611027_A
Introduction
vi
1.1.2 Cautions Regarding Safety of Users
Warning
Be sure to use parts listed in the service parts list of the applicable model and
appropriate tools to conduct repair work. Never attempt to modify the unit.
The use of inappropriate parts or tools may cause an electrical shock,
excessive heat generation or fire.
If the power cable and lead wires have scratches or deteriorated, be sure to
replace them.
Damaged cable and wires may cause an electrical shock, excessive heat
generation or fire.
Do not use a joined power cable or extension cable, or share the same power
outlet with other electrical appliances, since it may cause an electrical shock,
excessive heat generation or fire.
Be sure to use an exclusive power circuit for the unit, and follow the local
technical standards related to the electrical equipment, the internal wiring
regulations, and the instruction manual for installation when conducting
electrical work.
Insufficient power circuit capacity and improper electrical work may cause an
electrical shock or fire.
Be sure to use the specified cable for wiring. Make the connections securely
and route the cable properly so that there is no force pulling the cable at the
connection terminals.
Improper connections may cause excessive heat generation or fire.
When wiring, make sure that the terminal cover does not lift off or dismount
because of the cable.
If the cover is not mounted properly, the terminal connection section may cause
an electrical shock, excessive heat generation or fire.
When relocating the unit, make sure that the new installation site has sufficient
strength to withstand the weight of the unit.
If the installation site does not have sufficient strength and if the installation
work is not conducted securely, the unit may fall and cause injury.
This unit is designed for use with chilled or hot water. Using steam may
damage the unit or cause it to malfunction, and can lead to a burning.
