SiBE611027_A
Other Functions
Function and Control
16
8. Other Functions
8.1
Signal Receiving Sign
When the indoor unit receives a signal from the remote controller, the unit emits a signal
receiving sound.
8.2
Indoor Unit ON/OFF Button
An ON/OFF button is provided on the display of the unit.
Press the button to start operation. Press it again to stop.
It is useful when the remote controller is missing or the battery has run out.
The operation starts with the same settings (mode, temperature, airflow rate, airflow
direction) as the last operation.
<Forced operation mode>
Forced operation mode can be started by pressing the ON/OFF button for 5 to 9 seconds while
the unit is not operating.
Refer to "Forced operation mode" on page 75 for detail.
Note:
When the ON/OFF button is pressed for 10 seconds or more, the forced operation is stopped.
8.3
Titanium Apatite Photocatalytic Air-Purifying Filter
This filter combines the Air-Purifying Filter and Titanium Apatite Photocatalytic Deodorizing
Filter as a single highly effective filter. The filter traps microscopic particles, decompose odors
and even deactivates bacteria and viruses. It lasts for 3 years without replacement if washed
about once every 6 months.
8.4
Auto-restart Function
Even if a power failure (including one for just a moment) occurs during the operation, the
operation restarts automatically when the power is restored in the same condition as before the
power failure.
8.5
WEEKLY TIMER Operation
Up to 4 timer settings can be saved for each day of the week (up to 28 settings in total).
Those 3 items of “ON/OFF”, “temperature” and “time” can be set.
Refer to “WEEKLY TIMER Operation” on page 30 for detail.
ON / OFF button
(R12705)
