Operation Manual
SiBE611027_A
29
Operation Manual
2.7
ON TIMER Operation
17
ON TIMER Operation
To use ON TIMER operation
•
1. Press .
2.
3. Press again.
To cancel ON TIMER operation
4. Press .
To combine ON TIMER and OFF TIMER
NOTE
In the following cases, set the timer again.
Combined
Display
Check that the clock is correct. If not, set the clock to the
present time.
Press until the time setting reaches
the point you like.
(Example)
•
“ ” and setting time are displayed on the LCD.
•
“ ” is displayed on the LCD.
•
“ ” blinks.
•
“ ” and setting time disappear from the LCD.
•
“ ” and day of the week are displayed on the LCD.
•
The TIMER lamp goes off.
•
After a breaker has turned off.
•
After a power failure.
•
After replacing batteries in the remote controller.
•
A sample setting for combining the 2 timers is shown below.
•
Each pressing of either button increases or decreases
the time setting by 10 minutes. Holding down either
button changes the setting rapidly.
•
The TIMER lamp lights up.
Present time: 23:00
(The unit operating)
OFF TIMER at 0:00
ON TIMER at 14:00
