SiBE611027_A
Operation Manual
Operation Manual
24
2.3
Adjusting the Airflow Direction
12
Adjusting the Airflow Direction
You can adjust the airflow direction to increase your comfort.
To start auto swing
Press .
NOTE
Upper and lower airflow direction
Note on flap and louvers angle
ATTENTION
• Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at a high speed.
COOL
HEAT
To set the flap at desired
position
To adjust the louvers
(vertical blades)
• This function is effective while flap is in auto
swing mode.
• “ ” is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
• The flap will stop moving.
• “ ” disappears from the LCD.
Press when the flap has reached
the desired position.
• Unless “SWING” is selected, you should set the
flap at a near-horizontal angle in HEAT operation
and at a upward position in COOL operation to
obtain the best performance.
• During COOL operation, the range within which the
flap swings differs from the range within which the
flap can be fixed.
• When adjusting the flap by hand, turn off the unit,
and use the remote controller to restart the unit.
• Hold the knob and move the louvers.
(You will find a knob on the left-side and the right-side blades.)
