manualshive.com logo in svg

Daikin FTX-N/U, Руководство пользователя

"Daikin FTX-N/U" - это продукт современного кондиционера, который обеспечит вам комфорт в любое время года. Скачайте бесплатный руководство по эксплуатации на нашем сайте, чтобы ознакомиться с деталями настройки и обслуживания. Получите максимум от вашего кондиционера с помощью нашего мануала!

Поделиться
Скачать
background image

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

287

3P500431-1A

•

Tear apart and throw away plastic packaging bags so
that children will not play with them. Children playing with
plastic bags face the danger of death by suffocation.

 WARNING 

•

Contact your dealer for repair and maintenance. 
Improper repair and maintenance may result in water

leakage, electric shock, and fire. Only use accessories
made by Daikin that are specifically designed for use with

the equipment and have them installed by a professional.

•

Contact your dealer to move and reinstall the air
conditioner or heat pump. Incomplete installation may

result in water leakage, electric shock, and fire.

•

Never let the indoor unit or the remote controller get wet. 

Water can cause an electric shock or a fire.

• Never use flammable spray such as hair spray, lacquer, or

paint near the unit. Flammable spray may cause a fire.

•

When a fuse blows out, never replace it with one of
incorrect ampere ratings or different wires. Always replace

any blown fuse with a fuse of the same specification.

•

Never inspect or service the unit by yourself. Contact a

qualified service person to perform this work.

•

Turn off all electrical power before doing any maintenance
to avoid the risk of serious electric shock; never sprinkle or
spill water or liquids on the unit.

• Do not touch the switch with wet fingers. Touching a switch

with wet fingers can cause electric shock.

•

Do not allow children to play on or around the unit to
prevent injury. 

• The heat exchanger fins are sharp enough to cut. To avoid

injury wear gloves or cover the fins while working around

them.

• Do not put a finger or other objects into the air inlet or air

outlet. The fan is rotating at high speed and will cause
injury.

•

Check the unit foundation for damage on a continuous
basis, especially if it has been in use for a long time. If left
in a damaged condition the unit may fall and cause injury.

•

Never touch the internal parts of the controller. To check
and adjust internal parts, contact your dealer.

•

Be sure to establish a ground. 
Do not ground the unit to a utility pipe, arrester, or
telephone ground. Incomplete grounding may cause

electrical shock, or fire. A high surge current from lightning

or other sources may cause damage to the air conditioner.

•

Be sure to install a ground fault circuit interrupter. 
Failure to install a ground fault circuit interrupter may

result in electric shock or fire.

 CAUTION 

•

Do not use the air conditioner or heat pump for any other
purposes other than comfort cooling or heating. 
Do not use the unit for cooling precision instruments, food,
plants, animals or works of art.

•

Do not place items under the indoor unit as they may be
damaged by condensates that may form if the humidity is
above 80% or if the drain outlet gets blocked.

•

Before cleaning, stop the operation of the unit by turning
the power off or by pulling the supply cord out from its

receptacle. Otherwise, an electric shock and injury may

result.

•

Do not wash the air conditioner or heat pump with

excessive water. An electric shock or fire may result.

•

Avoid placing the controller in a spot splashed with water. 
Water entering the controller may cause an electric shock
or damage the internal electronic parts.

•

Do not operate the air conditioner or heat pump when
using a room-fumigation type of insecticide. 
Failure to observe this could cause the chemicals to be
deposited in the unit and can endanger the health of those
who are hypersensitive to chemicals.

•

Do not turn off the power immediately after stopping
operation. Always wait for at least 5 minutes before turning

off the power. Otherwise, water leakage may occur.

•

The appliance is not intended for use by young children or

infirm persons without supervision.

•

The remote controller should be kept away from children
so they cannot play with it.

•

Consult with the installation contractor for cleaning.

•

Incorrect cleaning of the inside of the air conditioner or
heat pump could make the plastics parts break and cause
water leakage or electric shock.

• Do not touch the air inlet or aluminum fin of the air

conditioner or heat pump as they can cut and cause injury.

•

Do not place objects in direct proximity of the outdoor unit. 
Do not let leaves and other debris accumulate around
the unit. Leaves are a hotbed for small animals which can

enter the unit. Once inside the unit, animals can cause the
unit to malfunction, and cause smoke or fire when they

make contact with electrical parts.

•

For care and cleaning, call service personnel.

2

01_EN_3P500431-1A.indd   2

11/26/2018   10:51:47 AM

Содержание FTX-N/U





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FTX-N/U

Cadac 942 User Instructions preview
942
Бренд: Cadac Страницы: 8
Fedders C12 Specification Sheet preview
C12
Бренд: Fedders Страницы: 4
Danfoss iSave 40 Service Manual preview
iSave 40
Бренд: Danfoss Страницы: 26
Calpeda GX Series Original Operating Instructions preview
GX Series
Бренд: Calpeda Страницы: 80
Danfoss DHP-AT User Manual preview
DHP-AT
Бренд: Danfoss Страницы: 24
DAYLIFF DB Installation & Operating Manual preview
DB
Бренд: DAYLIFF Страницы: 12
DAY 69662 Instruction Manual preview
69662
Бренд: DAY Страницы: 32
DAY Useful Everyday 69651 Instruction Manual preview
69651
Бренд: DAY Useful Everyday Страницы: 61
U-Line H-2961 Instructions preview
H-2961
Бренд: U-Line Страницы: 3
ProMinent gamma/ L Operating Instructions Manual preview
gamma/ L
Бренд: ProMinent Страницы: 81
Thermor Aeromax Piscine 10 Installation And User Manual preview
Aeromax Piscine 10
Бренд: Thermor Страницы: 32
UNIPRODO UNI_SAUNA_B4.5KW User Manual preview
UNI_SAUNA_B4.5KW
Бренд: UNIPRODO Страницы: 17
Productos McLand GARLAND GEISER 401 Q Instruction Manual preview
GARLAND GEISER 401 Q
Бренд: Productos McLand Страницы: 92
Stuart Boostamatic 4000 Operating Instructions Manual preview
Boostamatic 4000
Бренд: Stuart Страницы: 20
Gardenline HYSB-125PP Instruction Manual preview
HYSB-125PP
Бренд: Gardenline Страницы: 28
Raypak PROTÉGÉ RPAGP Service Instructions preview
PROTÉGÉ RPAGP
Бренд: Raypak Страницы: 3
Scarlett SC-1160 Instruction Manual preview
SC-1160
Бренд: Scarlett Страницы: 14
Davey DynaDrive DD60-10 Installation And Operating Instructions Manual preview
DynaDrive DD60-10
Бренд: Davey Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды