manualshive.com logo in svg

Daikin FTX-N/U, Руководство пользователя

"Daikin FTX-N/U" - это продукт современного кондиционера, который обеспечит вам комфорт в любое время года. Скачайте бесплатный руководство по эксплуатации на нашем сайте, чтобы ознакомиться с деталями настройки и обслуживания. Получите максимум от вашего кондиционера с помощью нашего мануала!

Поделиться
Скачать
background image

254

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

C: 3P379751-5D

4

Read Before Operation

• Do not place items under the indoor unit as they may be

damaged by condensates that may form if the humidity is
above 80% or if the drain outlet gets blocked.

• Before cleaning, stop the operation of the unit by turning

the power off or by pulling the supply cord out from its
receptacle. Otherwise, an electric shock and injury may
result.

• Do not wash the air conditioner or heat pump with

excessive water. An electric shock or fire may result.

• Avoid placing the controller in a spot splashed with water. 

Water entering the controller may cause an electric shock
or damage the internal electronic parts.

• Do not operate the air conditioner or heat pump when

using a room-fumigation type of insecticide.

 

Failure to observe this could cause the chemicals to be
deposited in the unit and can endanger the health of
those who are hypersensitive to chemicals.

• Do not turn off the power immediately after stopping

operation. Always wait for at least 5 minutes before
turning off the power. Otherwise, water leakage may
occur.

• The appliance is not intended for use by young children

or infirm persons without supervision.

• The remote controller should be kept away from children

so they cannot play with it.

• Consult with the installation contractor for cleaning.

• Incorrect cleaning of the inside of the air conditioner

or heat pump could make the plastics parts break and
cause water leakage or electric shock.

• Do not touch the air inlet or aluminum fin of the air

conditioner or heat pump as they can cut and cause injury.

• Do not place objects in direct proximity of the outdoor unit. 

Do not let leaves and other debris accumulate around
the unit. Leaves are a hotbed for small animals which can
enter the unit. Once inside the unit, animals can cause
the unit to malfunction, and cause smoke or fire when
they make contact with electrical parts.

 NOTE 

• Never press the button of the remote controller with

a hard, pointed object. The remote controller may be
damaged.

• Never pull or twist the electric wire of the remote

controller. It may cause the unit to malfunction.

• Do not place appliances that produce open flames in

places that are exposed to the airflow of the unit or under
the indoor unit. It may cause incomplete combustion or
deformation of the unit due to the heat.

• Do not expose the controller to direct sunlight. The LCD

display can become discolored and may fail to display the
data.

• Do not wipe the controller operation panel with benzene,

thinner, chemical dust cloth, etc. The panel may get
discolored or the coating can peel off. If it is heavily dirty,
soak a cloth in water-diluted neutral detergent, squeeze it
well and wipe the panel clean. Then wipe it with another
dry cloth.

• Dismantling of the unit, disposal of the refrigerant, oil, and

additional parts, should be done in accordance with the
relevant local, state, and national regulations.

• Operate the air conditioner or heat pump in a sufficiently

ventilated area and not surrounded by obstacles. Do
not use the air conditioner or heat pump in the following
places.

a.  Places with a mist of mineral oil, such as cutting oil.
b.   Locations such as coastal areas where there is a lot

of salt in the air.

c.   Locations such as hot springs where there is a lot of

sulfur in the air.

d.   Locations such as factories where the power voltage

varies a lot.

e.   In cars, boats, and other vehicles.
f.   Locations such as kitchens where oil may splatter or

where there is steam in the air.

g.   Locations where equipment produces

electromagnetic waves.

h.  Places with an acid or alkaline mist.
i.   Places where fallen leaves can accumulate or where

weeds can grow.

• Take snow protection measures. Contact your dealer for

the details of snow protection measures, such as the use
of a snow protection hood.

• Do not attempt to do electrical work or grounding work

unless you are licensed to do so. Consult with your dealer
for electrical work and grounding work.

• Pay attention to operating sound. Be sure to use the

following places:

a.   Places that can sufficiently withstand the weight of

the air conditioner or heat pump yet can suppress the
operating sound and vibration.

b. 

 

Places where warm air from the air outlet of the
outdoor unit or the operating sound of the outdoor unit
does not annoy neighbors.

• Make sure that there are no obstacles close to the

outdoor unit. Obstacles close to the outdoor unit may
drop the performance of the outdoor unit or increase the
operating sound of the outdoor unit.

• Consult your dealer if the air conditioner or heat pump in

operation generates unusual noise.

• Make sure that the drainpipe is installed properly to drain

water. If no water is discharged from the drainpipe while
the air conditioner or heat pump is in the cooling mode,
the drainpipe may be clogged with dust or dirt and water
leakage from the indoor unit may occur. Stop operating
the air conditioner or heat pump and contact your dealer.

01_EN_3P379751-5D.indd   4

11/13/2018   2:16:55 PM

Содержание FTX-N/U





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FTX-N/U

iBath ALFA Instructions And Maintenance Instructions preview
ALFA
Бренд: iBath Страницы: 12
EBARA 3U Operating Instructions, Installation & Maintenance Manual preview
3U
Бренд: EBARA Страницы: 16
EBARA 3D Operating And Maintenance Manual preview
3D
Бренд: EBARA Страницы: 40
EBARA GS Instruction Manual preview
GS
Бренд: EBARA Страницы: 38
Fagor TRV-240 Instructions For Use preview
TRV-240
Бренд: Fagor Страницы: 4
Fagor TRV-200 Instructions For Use preview
TRV-200
Бренд: Fagor Страницы: 4
Fagor RP-1009 Instructions For Use Manual preview
RP-1009
Бренд: Fagor Страницы: 26
Fagor RH-40 Instructions For Use preview
RH-40
Бренд: Fagor Страницы: 4
Fagor BALLONSR Manual De Instrucciones preview
BALLONSR
Бренд: Fagor Страницы: 12
Kampmann Katherm HK Assembly And Installation Instructions Manual preview
Katherm HK
Бренд: Kampmann Страницы: 16
Kamco C90 Guidance Notes preview
C90
Бренд: Kamco Страницы: 2
machine technologies MP-25 User Manual preview
MP-25
Бренд: machine technologies Страницы: 43
Calpeda e-idos E-MPSM Operating Instructions Manual preview
e-idos E-MPSM
Бренд: Calpeda Страницы: 72
DAB PUMPS LEADER ECOTRONIC Series Instruction For Installation And Maintenance preview
LEADER ECOTRONIC Series
Бренд: DAB PUMPS Страницы: 10
Gude GMP 100 4T Translation Of Original Operating Instructions preview
GMP 100 4T
Бренд: Gude Страницы: 62
EINHELL HW 900 Niro Operating Instructions Manual preview
HW 900 Niro
Бренд: EINHELL Страницы: 44
GORMAN-RUPP PUMPS SUPER T T6A60S-4LE2X FT4 Series Installation, Operation, And Maintenance Manual With Parts List preview
SUPER T T6A60S-4LE2X FT4 Series
Бренд: GORMAN-RUPP PUMPS Страницы: 48
ProMinent gamma/ L Operating Instructions Manual preview
gamma/ L
Бренд: ProMinent Страницы: 81

Бренды по названию

Популярные бренды

Загрузить еще бренды