manualshive.com logo in svg

Daikin FTX-N/U, Руководство пользователя

"Daikin FTX-N/U" - это продукт современного кондиционера, который обеспечит вам комфорт в любое время года. Скачайте бесплатный руководство по эксплуатации на нашем сайте, чтобы ознакомиться с деталями настройки и обслуживания. Получите максимум от вашего кондиционера с помощью нашего мануала!

Поделиться
Скачать
background image

428

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

2P126475-1

NAMES AND FUNCTIONS

1

PUTTING ROOM NAME INDICATION STICKER

DISPLAY OF MALFUNCTION

2

4

SELECTING CONTROL MODES

3

“UNDER HOST COMPUTER
INTEGRATED CONTROL” LAMP

When this lamp turns on, no
other operations are possible.

ROOM NAME INDICATION
PLATE
Refer to the “2. PUTTING 
ROOM NAME INDICATION 
STICKER”

GROUP NO.

UNIFIED OPERATION/STOP
BUTTON
Starts/stops all indoor units.

OPERATION LAMP

Turns on during operation of
each group and flashes
during malfunction stop.

INDIVIDUAL OPERATION/
STOP BUTTON

Starts/stops each indoor unit
group individually.

〈〈

NOTE

〉〉

●

When using unified ON/OFF controller with other

optional controllers for centralized control,
“OPERATION LAMP” of the equipment which is
not operated may turn on or off after several
minutes.
This state occurs due to signal communications
and is not a failure.

●

Do not open the upper part of remote controller

except when rewriting the indication sticker or
selecting control modes.

Open the upper part of remote controller.
Insert a (–) screwdriver into the recess between the upper and lower part of remote 
controller (at 2 locations) and twist the screwdriver lightly.

Pull out the room name indication plate.
Insert the point of a mechanical pencil etc, into the hole of the indication sticker to 
pull it out.

PC board is attached both the upper and lower part of remote controller. 
Do not damage the board with the screwdriver.

1

Indication plate

Control mode selector

(DS2)

(–) screwdriver

(2 locations)

3

5

4

2

Flashing of lamps indicates malfunctions. Contact your Daikin dealer.
When turning power supply on, all lamps may light and UNDER HOST COMPUTER INTEGRATED CONTROL lamp may flash and not accept the operation for about on minute.
These conditions are not malfunctions.

States of lamps

Contents of malfunctions

Flashing of operation lamp

Flashing of UNDER HOST COMPUTER INTEGRATED CONTROL lamp

Indicates malfunctions in the indoor unit in the group where the operation lamp is flashing.

Indicates malfunctions in optional controllers for centralized control.

The following four patterns of control mode can be set.

Control mode

Individual

Centralized

Timer operation possible by 

remote controller

ON/OFF control impossible by 

remote controller

Content

DS2 setting

Operation/stop is controlled by both 
unified ON/OFF controller and 
remote controller.

After operated by unified ON/OFF 
controller,operation/stop is freely
controlled by remote controller until 
stopped by unified ON/OFF 
controller.

When used in conjunction with schedule 
timer, operation/stop is controlled freely 
by remote controller during the set time 
but operation is not available when 
schedule timer is ON.

Operation/stop is controlled by 
unified ON/OFF controller only. 
Indoor units can not be operated/
stopped by remote controller.

CONTR

OL MODE

CONTR

OL MODE

CONTR

OL MODE

(F

actor

y set)

NOTE:

•         

 indicates the position of switches.

•

Set control modes before turning power supply on.

•

When used in conjunction with central remote controller, the control modes of the central remote controller has the priority.

CONTR

OL MODE

Put the attached indication sticker on the room name indication plate.

In case of serial type

Indication sticker

In case of individual type

Indication sticker

Indication plate

Indication plate

Put the sticker aligning the lines of the sticker with those of the plate.

Put the sticker on the center of the frame.
Write the room name in the frame of the sticker with a ball point pen or a felt-tip 
pen (oil-base).

Reinstall the plate as it were, with checking the correct direction.

Close the upper part of remote controller.

Содержание FTX-N/U





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FTX-N/U

L.B. White Journeyman Owner'S Manual preview
Journeyman
Бренд: L.B. White Страницы: 81
Quincy Compressor QSV 205 Instruction Manual preview
QSV 205
Бренд: Quincy Compressor Страницы: 122
York YCUL0026 Manual preview
YCUL0026
Бренд: York Страницы: 84
Kessel 85 101 Installation, Operation And Maintenance Instructions preview
85 101
Бренд: Kessel Страницы: 24
Westfalia 81 58 36 Instruction Manual preview
81 58 36
Бренд: Westfalia Страницы: 18
Aktobis WDH-BGP09 Quick Start Manual preview
WDH-BGP09
Бренд: Aktobis Страницы: 6
Dometic 441003.701 Installation Instructions Manual preview
441003.701
Бренд: Dometic Страницы: 10
Stoll Gas Log Grate Heater Installation & Operating Instructions preview
Gas Log Grate Heater
Бренд: Stoll Страницы: 4
SHG Mini-CHIEMSEE B 1100 Operating Manual preview
Mini-CHIEMSEE B 1100
Бренд: SHG Страницы: 26
Parkside PRP 400 B1 Translation Of The Original Instructions preview
PRP 400 B1
Бренд: Parkside Страницы: 220
2VV ESSENSSE NEO VCES3 AC Series Installation Manual preview
ESSENSSE NEO VCES3 AC Series
Бренд: 2VV Страницы: 20
Earthwise Technologies CZ Infrared CZ-1000F Owner'S Manual preview
CZ Infrared CZ-1000F
Бренд: Earthwise Technologies Страницы: 12
ACE INSTRUMENTS DPI-2200 Instruction Manual preview
DPI-2200
Бренд: ACE INSTRUMENTS Страницы: 3
Solbee SBH 15 C Installation And Operating Instruction preview
SBH 15 C
Бренд: Solbee Страницы: 4
B-TEC IR-B01-B User Manual preview
IR-B01-B
Бренд: B-TEC Страницы: 11
Hagen ELITE SUBMERSIBLE Quick Start Manual preview
ELITE SUBMERSIBLE
Бренд: Hagen Страницы: 2
Parkside PTPS 1100 B2 Translation Of The Original Instructions preview
PTPS 1100 B2
Бренд: Parkside Страницы: 122
Lasko CT22425 Operating Manual preview
CT22425
Бренд: Lasko Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды