manualshive.com logo in svg

Daikin FTX-N/U, Руководство пользователя

"Daikin FTX-N/U" - это продукт современного кондиционера, который обеспечит вам комфорт в любое время года. Скачайте бесплатный руководство по эксплуатации на нашем сайте, чтобы ознакомиться с деталями настройки и обслуживания. Получите максимум от вашего кондиционера с помощью нашего мануала!

Поделиться
Скачать
background image

218

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

3P572320-1

3

Read Before Operation

Safety Considerations

Read these 

Safety Considerations for Operations

 carefully 

before operating an air conditioner or heat pump.

 

Make sure that the unit operates properly during the startup 
operation. Instruct the user on how to operate and maintain 
the unit. 

 

Inform users that they should store this operation manual 
with the installation manual for future reference.

 

Meanings of 

DANGER

, 

WARNING

, 

CAUTION

, and 

NOTE

 

Symbols:

 DANGER  �����������

Indicates an imminently hazardous
situation which, if not avoided, will 
result in death or serious injury.

 WARNING  ���������

Indicates a potentially hazardous
situation which, if not avoided, 
could result in death or serious 
injury.

 CAUTION  ����������

Indicates a potentially hazardous
situation which, if not avoided, may 
result in minor or moderate injury. 

 

It may also be used to alert against 
unsafe practices.

 NOTE  ����������������

Indicates situations that may result
in equipment or property-damage 
accidents only.

 DANGER 

•

Do not install the unit in an area where flammable
materials are present due to risk of explosion resulting in
serious injury or death.

•

Any abnormalities in the operation of the air conditioner
or heat pump, such as smoke or fire, could result in
severe injury or death. Turn off the power and contact
your dealer immediately.

•

Refrigerant gas may produce toxic gas if it comes into
contact with fire, such as from a fan heater, stove, or
cooking device. Exposure to this gas could cause severe
injury or death.

•

For refrigerant leakage, consult your dealer. 
Refrigerant gas is heavier than air and replaces oxygen. 
A massive leak could lead to oxygen depletion, especially
in basements, and an asphyxiation hazard could occur
leading to serious injury or death.

•

If equipment utilizing a burner is used in the same room
as the air conditioner or heat pump, there is the danger
of oxygen deficiency which could lead to an asphyxiation
hazard resulting in serious injury or death. Be sure to
ventilate the room sufficiently to avoid this hazard.

•

Safely dispose of the packing materials. Packing
materials, such as nails and other metal or wooden parts,
may cause stabs or other injuries.

•

Tear apart and throw away plastic packaging bags so
that children will not play with them. Children playing with
plastic bags face the danger of death by suffocation.

 WARNING 

•

Contact your dealer for repair and maintenance.

 

Improper repair and maintenance may result in water
leakage, electric shock, and fire. Only use accessories
made by Daikin that are specifically designed for use with
the equipment and have them installed by a professional.

•

Contact your dealer to move and reinstall the air
conditioner or heat pump. Incomplete installation may
result in water leakage, electric shock, and fire.

•

Never let the indoor unit or the remote controller get wet. 
Water can cause an electric shock or a fire.

•

Never use flammable spray such as hair spray, lacquer,
or paint near the unit. Flammable spray may cause a fire.

•

When a fuse blows out, never replace it with one of
incorrect ampere ratings or different wires. Always replace
any blown fuse with a fuse of the same specification.

•

Never remove the fan guard of the unit. A fan rotating at
high speed without the fan guard is very dangerous.

•

Never inspect or service the unit by yourself. Contact a
qualified service person to perform this work.

•

Turn off all electrical power before doing any maintenance
to avoid the risk of serious electric shock; never sprinkle
or spill water or liquids on the unit.

•

Do not touch the switch with wet fingers. Touching a
switch with wet fingers can cause electric shock.

•

Do not allow children to play on or around the unit to
prevent injury. 

•

The heat exchanger fins are sharp enough to cut. To avoid
injury wear gloves or cover the fins while working around them.

•

Do not put a finger or other objects into the air inlet or air
outlet. The fan is rotating at high speed and will cause injury.

•

Check the unit foundation for damage on a continuous
basis, especially if it has been in use for a long time. If left
in a damaged condition the unit may fall and cause injury.

•

Placing a flower vase or other containers with water or
other liquids on the unit could cause a shock or fire if a
spill occurs.

•

Do not touch the air outlet or horizontal blades while
the swing flap is in operation because fingers could get
caught and injured.

•

Never touch the internal parts of the controller. Do not
remove the front panel because some parts inside are
dangerous to touch. To check and adjust internal parts,
contact your dealer.

 CAUTION 

•

Do not use the air conditioner or heat pump for any other
purposes other than comfort cooling or heating. 
Do not use the unit for cooling precision instruments,
food, plants, animals or works of art.

01_EN_3P572320-1.indd   3

2019/06/10   17:01:06

13.2  FTX18/24UVJU

Содержание FTX-N/U





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FTX-N/U

Daikin C-Series Operation Manual preview
C-Series
Бренд: Daikin Страницы: 27
Uberhaus 1820 Owner'S Manual preview
1820
Бренд: Uberhaus Страницы: 19
Nastec PILOT Instructions For Installation, Use And Maintenance Manual preview
PILOT
Бренд: Nastec Страницы: 28
vacuubrand MD 4C NT Instructions For Use Manual preview
MD 4C NT
Бренд: vacuubrand Страницы: 80
DAB E SYBOX MINI Assembly And Dismantling Manual preview
E SYBOX MINI
Бренд: DAB Страницы: 41
Watson-Marlow BREDEL 701 Series Manual preview
BREDEL 701 Series
Бренд: Watson-Marlow Страницы: 25
VERDER Verderflex Vantage 5000 Series Original Operating Manual preview
Verderflex Vantage 5000 Series
Бренд: VERDER Страницы: 58
VOLTOMAT HEATING FH-110707.1 Instruction Manual preview
FH-110707.1
Бренд: VOLTOMAT HEATING Страницы: 170
Cordivari Ardesia Operating Instructions Manual preview
Ardesia
Бренд: Cordivari Страницы: 24
Carrier 38BNB018-036 Owner'S Manual preview
38BNB018-036
Бренд: Carrier Страницы: 36
VEAB CWW Manual preview
CWW
Бренд: VEAB Страницы: 10
Homa Baureihe H 163 Installation And Operation Instruction Manual preview
Baureihe H 163
Бренд: Homa Страницы: 32
Qlima R 7227S TC-2 Operating Manual preview
R 7227S TC-2
Бренд: Qlima Страницы: 176
Tsurumi Pump EPT5-150HA Operation, Maintenance And Parts Manual preview
EPT5-150HA
Бренд: Tsurumi Pump Страницы: 15
Champion 100192 Owner'S Manual preview
100192
Бренд: Champion Страницы: 27
Dynaset HVB 350/18-60 User Manual preview
HVB 350/18-60
Бренд: Dynaset Страницы: 54
Viessmann BW 351.A07 Installation And Service Instructions For Contractors preview
BW 351.A07
Бренд: Viessmann Страницы: 148
coval LEMAX90X B3 Series Operating Instruction preview
LEMAX90X B3 Series
Бренд: coval Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды