SiBE04-101
Instruction
System Configuration
71
11
Adjusting the Air Flow Direction
You can adjust the air flow direction to increase
your comfort.
Adjusting the
horizontal blade (flap)
.......
To stop the flap at an
angle you like, press
SWING
.
Press
SWING
.
●
Every time the button is pressed, “
”
appears or disappears.
.......
The flap automatically
swings up and down.
ATTENTION
●
Always use a remote controller to adjust
the flap angle.
If you attempt to move it forcibly with
hand when it is swinging, the
mechanism may be broken.
NOTE
●
Unless [SWING] is selected, you should
set the flap at a near- horizontal angle in
COOL or DRY mode to obtain the best
performance.
●
In COOL or DRY mode, if the flap is fixed
at a downward position, the flap
automatically moves in about 60 minutes
to prevent condensation on it.
No display
Notes on flap angles
●
When [SWING] is selected, the flap swinging
range depends on the operation mode. (See
the figure.)
DRY
COOL
FAN
HEAT
Adjusting the vertical blade
(louvre)
●
When adjusting the louvre, use a robust and
stable stool and watch your steps carefully.
Hold the knob and move the louvre.
(You will find a knob on the left side and the
right side blades.)
SiBE04-101.book Page 71 Monday, October 15, 2001 3:08 PM
