![background image](http://html1.mh-extra.com/html/daikin/fhq100buv1b-x-2/fhq100buv1b-x-2_service-manual_2459261036.webp)
SiBE28-804
Wireless Remote Controller
Remote Controller
25
1
DISPLAY “
” (SIGNAL
TRANSMISSION)
This lights up when a signal is being
transmitted.
2
DISPLAY “
” “
” “
” “
”
“
” (OPERATION MODE)
This display shows the current OPER-
ATION MODE. For straight cooling
type, “
” (Auto) and “
” (Heating)
are not installed.
3
DISPLAY “
” (SET TEMPERATURE)
This display shows the set tempera-
ture.
4
DISPLAY “
”
(PROGRAMMED TIME)
This display shows PROGRAMMED
TIME of the system start or stop.
5
DISPLAY “
” (AIR FLOW FLAP)
6
DISPLAY “
” “
” (FAN SPEED)
The display shows the set fan speed.
7
DISPLAY “
”
(INSPECTION/ TEST OPERATION)
When the INSPECTION/TEST OPER-
ATION BUTTON is pressed, the display
shows the system mode is in.
8
ON/OFF BUTTON
Press the button and the system will
start. Press the button again and the
system will stop.
9
FAN SPEED CONTROL BUTTON
Press this button to select the fan
speed, HIGH or LOW, of your choice.
M
H
L
C
hr.
hr.
TEST
10
TEMPERATURE SETTING BUTTON
Use this button for SETTING TEMPER-
ATURE (Operates with the front cover
of the remote controller closed.)
11
PROGRAMMING TIMER BUTTON
Use this button for programming
“START and/or STOP” time. (Operates
with the front cover of the remote con-
troller opened.)
12
TIMER MODE START/STOP BUTTON
13
TIMER RESERVE/CANCEL BUTTON
14
AIR FLOW DIRECTION ADJUST
BUTTON
15
OPERATION MODE SELECTOR
BUTTON
Press this button to select OPERATION
MODE.
16
FILTER SIGN RESET BUTTON
Refer to the section of MAINTENANCE
in the operation manual attached to the
indoor unit.
17
INSPECTION/TEST OPERATION
BUTTON
This button is used only by qualified
service persons for maintenance
purposes.
18
EMERGENCY OPERATION SWITCH
This switch is readily used if the remote
controller does not work.
19
RECEIVER
This receives the signals from the
remote controller.
20
OPERATING INDICATOR LAMP
(Red)
This lamp stays lit while the air
conditioner runs. It flashes when the
unit is in trouble.
21
TIMER INDICATOR LAMP (Green)
This lamp stays lit while the timer is set.
C: 3PA63363-25Z
C: 3PA63363-21T
C: 3P107422-1F
C: 3PA63363-8L
22
AIR FILTER CLEANING TIME
INDICATOR LAMP (Red)
Lights up when it is time to clean the air
filter.
23
DEFROST LAMP (Orange)
Lights up when the defrosting opera-
tion has started. (For straight cooling
type this lamp does not turn on.)
Содержание FHQ100BUV1B x 2
