manualshive.com logo in svg

Daikin FDMQ-R Series, Руководство пользователя

Серия продуктов Daikin FDMQ-R предлагает пользовательские руководства для бесплатного скачивания. Узнайте как монтаж и обслуживание вашего оборудования с помощью наших подробных инструкций. Скачайте руководство с нашего сайта manualshive.com уже сегодня и наслаждайтесь эффективностью работы вашей системы от Daikin.

Поделиться
Скачать
background image

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

249

3P572320-1

34

When the Need Arises

Water or mist comes out

Case

Description / what to check

Mist comes out of the indoor unit�

•

This happens when the air in the room is cooled into mist by the cold airflow during COOL
or other operation.

Water is leaking from the indoor 

unit

•

If the drain hose is crushed or clogged, water from the indoor unit may be unable to drain
and start leaking. Stop operation of the unit immediately and contact your dealer.

Remote controller

Case

Description / what to check

The unit does not receive signals 

from the remote controller or has 

a limited operating range�

•

The batteries may be exhausted. 
Replace both batteries with new dry batteries AAA.LR03 (alkaline). 
For details, refer to 

“Preparation Before Operation”

. 

 Page 9

•

Signal communication may be disabled if an electronic-starter-type fluorescent lamp (such
as inverter-type lamps) is in the room. Consult your dealer if that is the case.

•

The remote controller may not function correctly if the transmitter is exposed to direct sunlight.

LCD is faint, is not working, or the 

display is erratic�

•

The batteries may be exhausted. 
Replace both batteries with new dry batteries AAA.LR03 (alkaline). 
For details, refer to 

“Preparation Before Operation”

. 

 Page 9

Other electric devices start 

operating�

•

If the remote controller activates other electric devices, move them away or consult your
dealer.

Air has an odor

Case

Description / what to check

The air conditioner gives off an 

odor�

•

The room odor absorbed in the unit is discharged with the airflow. 
We recommend you to have the indoor unit cleaned. Please consult your dealer.

•

The indoor unit is blowing out room odor it has absorbed (the smell of walls or carpeting,
furniture, clothes, and so on).

 

If the air conditioner has been used for a long time, there is a chance that a dirty heat
exchanger or fan are emitting an odor.

 

We recommend you to have the indoor unit cleaned. Please consult your dealer. 
Do not spray the air conditioner unit with any deodorizers.

Others

Case

Description / what to check

The air conditioner suddenly 

starts behaving strangely during 

operation�

•

The air conditioner may malfunction due to lightning or radio.

 

If the air conditioner malfunctions, turn off the power with the circuit breaker and restart the
operation with the remote controller.

HEAT operation cannot be 

selected, even though the unit is 

heat pump model�

•

Check that the jumper (J8) has not been cut. If it
has been cut, contact your dealer.

Jumper (J8)

The ON/OFF TIMER does not  

 operate according to the settings�

•

Check if the ON/OFF TIMER and the WEEKLY TIMER are set to the same time. 
Change or deactivate the settings in the WEEKLY TIMER. 

 Page 21

The ceiling and walls around the 

indoor unit are black and dirty�

•

Due to the circulation pattern of the air and static electricity, the air conditioner is causing
airborne dirt and dust to stick to walls and other surfaces. Depending on the wallpaper type,
dirt may adhere more easily. A thorough cleaning of the area around the air conditioner is
recommended.

Notes on the operating conditions

•

If operation continues under any conditions other than those
listed in the table,
−  A safety device may activate to stop the operation.
−  Dew may form on the indoor unit and drip from it when COOL

or DRY operation is selected.

Mode

Operating conditions

COOL / DRY

Outdoor temperature: 50-115°F (10-46°C)
Indoor temperature: 64-90°F (18-32°C)
Indoor humidity: 80% max.

HEAT

Outdoor temperature: 5-75°F (–15-24°C)
Indoor temperature: 50-86°F (10-30°C)

01_EN_3P572320-1.indd   34

2019/06/10   17:01:18

Содержание FDMQ-R Series





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FDMQ-R Series

Danfoss FC 100 Operating Instructions Manual preview
FC 100
Бренд: Danfoss Страницы: 68
Bang & Olufsen BeoSound Century User Manual preview
BeoSound Century
Бренд: Bang & Olufsen Страницы: 29
Danfoss VLT AQUA Drive FC 202 Operating Manual preview
VLT AQUA Drive FC 202
Бренд: Danfoss Страницы: 174
Korenix JetCon 2301S Quick Installation Manual preview
JetCon 2301S
Бренд: Korenix Страницы: 2
StarTech.com ET91000LCOAM Manual preview
ET91000LCOAM
Бренд: StarTech.com Страницы: 24
M-Audio Portman 2x4 Manual preview
Portman 2x4
Бренд: M-Audio Страницы: 20
Karma CONV 4DB2 Instruction Manual preview
CONV 4DB2
Бренд: Karma Страницы: 2
OTS FT800-SMR Installation And Operation Manual preview
FT800-SMR
Бренд: OTS Страницы: 14
Gesan DPR 100 User Manual preview
DPR 100
Бренд: Gesan Страницы: 80
Intech TW-DA Installation & Maintenance preview
TW-DA
Бренд: Intech Страницы: 4
AVT MAGIC EEC Hardware & Software Manual preview
MAGIC EEC
Бренд: AVT Страницы: 82
Monoprice Blackbird 9140A-PCA User Manual preview
Blackbird 9140A-PCA
Бренд: Monoprice Страницы: 11
d2itsu CSAD UiAWP 100 PS Series Installation Manual preview
CSAD UiAWP 100 PS Series
Бренд: d2itsu Страницы: 56
R&S AFQ100A Operating Manual preview
AFQ100A
Бренд: R&S Страницы: 401
ALM MFX User Manual preview
MFX
Бренд: ALM Страницы: 34
ADF Web HD67B78-A1 User Manual preview
HD67B78-A1
Бренд: ADF Web Страницы: 28
C2G TRUlink 81667 User Manual preview
TRUlink 81667
Бренд: C2G Страницы: 263
G-Power America GN10000DEW Owner'S Manual preview
GN10000DEW
Бренд: G-Power America Страницы: 55

Бренды по названию

Популярные бренды

Загрузить еще бренды